Where there is a change in level at the entry to a wheelchair space, the change in level shall comply with M303.3....
Search Results "Wheelchair Space (Assembly)"
Commonly Searched Documents
-
M303.3 Entry
-
1. Width and Depth of Wheelchair Spaces
The MDE NPRM further proposed two alternative depth requirements: 48 inches for wheelchair spaces that are entered from the front or rear, and 60 inches for wheelchair spaces entered from...
-
1002.4.5 Ride Entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear....
-
T603.3 Design Load
Wheelchair securement systems shall comply with the design loads specified in T603.3.1 or T603.3.2, as applicable....
-
Clear Floor or Ground Space: ADA Standard Section 804.6.1
A clear floor or ground space complying with 305 shall be provided at each kitchen appliance. Clear floor or ground spaces shall be permitted to overlap....
-
M303.2.2 Width (Section-by-Section Analysis)
The MDE NPRM proposed to require that diagnostic equipment used by patients seated in a wheelchair provide a wheelchair space that was at least 36 inches wide....
-
M303.2.4.2.1 Depth
Wheelchair spaces shall include knee and toe clearance 17 inches (430 mm) deep minimum and 25 inches (635 mm) deep maximum....
-
11B-221.4 Designated aisle seats
For example, an assembly area has two aisles (A and B) serving seating areas with an accessible route connecting to the top and bottom of Aisle A only....
-
Stowage of Wheelchairs and Mobility Aids
Wheelchair users may provide written instructions concerning assembly and disassembly of their devices....
-
M303.2.4.2.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum measured from the toe end of the wheelchair...
-
Clear Floor Space: ADA Standard Section 808.3
Each jury box and witness stand shall have, within its defined area, clear floor space complying with 305....
-
5.8.2.4 Unobstructed Floor Space
5.8.2.4 Unobstructed Floor Space. The unobstructed floor space in front of the base support should be a minimum of 17 inches deep....
-
§ 37.3 Wheelchair
Wheelchair means a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed or modified for and used by individuals with mobility impairments, whether...
-
§ 37.3 Wheelchair
Wheelchair means a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed or modified for and used by individuals with mobility impairments, whether...
-
M303.2.4 Equipment Clearances
Where wheelchair spaces are entered from the rear and includes space beneath components, wheelchair spaces shall include knee and toe clearances complying with M303.2.4.1 for breast platforms...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Power Chair
These dimensions are: (A) occupied width, the horizontal distance between the side-most (lateral-most) points of the wheelchair or occupant on the right and left side; (B) occupied length...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices....
-
What is a “wheelchair”?
Section 37.3 of the DOT regulations implementing the Americans with Disabilities Act of 1990 (ADA) (49 CFR Parts 27, 37, and 38) defines a “wheelchair” as a mobility aid belonging...
-
What is a “wheelchair”?
Section 37.3 of the DOT regulations implementing the Americans with Disabilities Act of 1990 (ADA) (49 CFR Parts 27, 37, and 38) defines a “wheelchair” as a mobility aid belonging to any...
- International Society of Wheelchair Professionals (ISWP)
-
M303.2.2 Width
Wheelchair spaces shall be 36 inches (915 mm) wide minimum....
-
Clear Deck Space: ADA Standard Section 1009.4.1
A clear deck space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
F221 Assembly Areas
[See subsections ...]
-
221 Assembly Areas
[See subsections ...]