Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility...
Search Results "Recreational Surfacing"
Filters
Commonly Searched Documents
-
11B-1002.4.4.2 Side entry
-
904.3.3 Check Writing Surfaces
Where provided, check writing surfaces shall comply with 902.3....
-
904.3.3 Check Writing Surfaces
Where provided, check writing surfaces shall comply with 902.3....
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
A Longitudinal Study of Playground Surfaces to Evaluate Accessibility - Final Report
A LONGITUDINAL STUDY OF PLAYGROUND SURFACES TO EVALUATE ACCESSIBILITY Final Report October 2013 Staff Liaison Peggy Greenwell U.S....
-
Accessible Surfaces Located In The Use Zone
Accessible Surfaces Located In The Use Zone If located within the use zone, accessible ground surfaces must also be impact attenuating and meet ASTM F 1292-04 Standard Specification for...
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height....
-
StormPave Permeable Clay Pavers Installation Video 2 (Compaction)
Requires the Registered User plan or above. Login! -
StormPave Permeable Clay Pavers Installation Video
Requires the Registered User plan or above. Login! -
Picnic Units
Usually, the slope, surface, and size requirements for the overlapping or adjacent clear spaces of the unit's constructed features within a picnic unit eliminate the need for separate outdoor...
-
Vehicle Parking
However, slip resistance is not required for parking in recreation areas because leaves and needles, dirt, ice, snow, and other surface debris and weather conditions are components of the...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages.
-
Rotational Penetrometer
It can be used easily in the field, is suitable for trail use, and does not require a level surface for testing....
-
1.1 Conditions for an Exception
Where one or more of the following conditions exists in an outdoor recreation area, an "exception" provided in the guidelines for that specific technical requirement can be used where...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1. ...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
UltraPlay Poured-in-Place Rubber Surface
Attractive, resilient, seamless two-layer surface that is slip-resistant and ultimately accessible Available in a variety of colors that can be can be combined to create inlaid designs...
-
Installation: ADA Standard Section 609.7
Section 609.7 covers the current ADA Standards for the installations of grab bars.
-
11B-609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
Eco-Grip Flooring Video 4 of 8 Routing and Heat Welding
Eco-Grip Flooring Routing and Heat Welding
-
Eco-Grip Flooring Video 5 of 8 Inside and Outside Corners
Eco-Grip Flooring Inside and Outside Corner Installation
