On August 2, the Senate Committee on Labor and Human Resources voted unanimously to report the ADA, as amended, to the Senate floor....
Search Results "Floor Surface"
-
Creating a Workable ADA: The Senate and the White House
-
Technical Infeasibility
design solutions are not feasible; or work that would impact load-bearing walls and other essential components of the structural frame, including structural reinforcement of the floor...
-
E. Restaurants and Concessions:
PSE shall make alterations and additions to all dining counters so that at least five (5) percent of the seating and standing spaces at the counter provide a clear floor space positioned...
-
§ 38.77(c)
Vertical stanchions from ceiling to floor shall not interfere with wheelchair or mobility aid circulation and shall be kept to a minimum in the vicinity of accessible doors....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
IDEA Center
For scooters, it could be the outside edge of the device housing, the elbows or the outside surface of the hips or shoulders, if they hung over the housing....
-
M305.2.4 Cross Section (Section-by-Section Analysis)
The Access Board sought input in MDE NPRM preamble question 21, on whether the gripping surfaces of current transfer supports on different types of equipment meet the cross sectional dimensions...
-
Trailhead Information Signs [F216.13 and 1017.10]
The new trail information signs must include the following information: Length of the trail or trail segment Type of trail surface Typical and minimum trail tread...
-
T402 Ramps and Bridgeplates
The technical requirements for ramps and bridgeplates in the 2016 Non-Rail Vehicle Guidelines include provisions on design load, installation and operation, emergency operation, surfaces...
-
205 Operable Parts
by service or maintenance personnel (Exception 1) electrical or communication receptacles serving a dedicated use (Exception 2) certain outlets at kitchen counters (Exception 3) floor...
-
2. What does the ADA require for accessibility of pools?
The Standards also provide technical specifications for when a means of entry is accessible, such as, for pool lifts, the location, size of the seat, lifting capacity, and clear floor space...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor...
-
Bobrick WingIt Grab Bar Fastener
Designed for 2.5" and 3.5" (65mm and 90mm) or deeper hollow walls with finished wall surfaces 0.25" to 1.5" (6mm to 38mm) thick. ...
-
Wikk Industries Inc. Bollard With Push Plate PART# BPTR6SMRBP3632D
Surface mount with welded round base plate (RB). 1 Prep for ADA switch, Welded flat top. Shown on the bollard- 4R-3 US32D (630). Switch is sold separately....
-
Executive Summary
Mitigation of changes in lighting levels such as between the outdoors and the interior, from one level of interior illumination to another, and within spaces between one surface and another...
-
Character Height: ADA Standard Section 703.5.5
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
AJW Architectural Products US80 Security Soap Dish, Chase Mount - Recessed
satin finish Exposed mounting Unit is designed for security applications Product Specs Soap Dish: Fabricated of #16 gauge stainless steel with a #4 satin finish on all exposed surfaces...
