Section 208 specifies the minimum number of parking spaces required to be accessible....
Search Results "Limited Access Space"
-
208 Parking Spaces
-
Issue 2: Location relative to the crosswalk
For recommended pedestrian pushbutton locations at a variety of ramp types, see Chapter 6 in Special Report: Accessible Public Rights-of-Way, Planning and Designing for Alterations, which...
-
1007.4 Elevators
An elevator to be considered part of an accessible means of egress shall comply with the emergency operation and signaling device requirements of Section 2.27 of ASME A17.1....
-
4.1 Plan Ahead
For example, you may want to know: Do you have an accessible entrance (i.e. one that has no stairs, a wide doorway, near accessible parking spaces)?...
-
Section 35.151(f) Housing at a Place of Education (Section-by-Section Analysis)
that residence halls or dormitories operated by or on behalf of places of education shall comply with the provisions of the proposed standards for transient lodging, including, but not limited...
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48.
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3.
-
5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height
5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height. Edge protection is not required on platforms 1 ½ inches or less in height.
-
5.8.1.2.1 Ramped Entry Slope
5.8.1.2.1 Ramped Entry Slope. Raised platforms should have a ramp with slopes that do not exceed the following: Rise 0 to 1 ½ inches – 1:2 Slope Rise >1 ½ to 2 ½ inches – 1:8...
-
5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides
5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides. A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry...
-
5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides
5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides. A 2 inch high edge protection must be provided on the back of the platform, opposite the entry...
-
5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations
5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations The Committee recommends that no edge protection be required on platforms of 1½ inches or less...
-
§ 36.302(f)(7) Secondary ticket market
(7) Secondary ticket market.
-
12162(a)(3)(A)(ii)(I)
(I) to park and secure wheelchairs (to accommodate individuals who wish to remain in their wheelchairs) equal to not less than the total number of single-level rail passenger coaches...
-
12162(a)(3)(A)(ii)(II)
(II) to fold and store wheelchairs (to accommodate individuals who wish to transfer to coach seats) equal to not less than the total number of single-level rail passenger coaches in...
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48.
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3.
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side.
-
1012.3 Opening limitations
At elevated walking surfaces for access to and use of electrical, mechanical or plumbing systems or equipment, guards shall have balusters or be of solid materials such that a sphere with...
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
1009.9 at doors to areas of refuge and exterior areas for assisted rescue shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5 and include an International Symbol of Accessibility...
-
Appendix 2- Photos of Participants in the IDEA Center Research
Examples of High Seats: Examples of Very Large and Small Clear Floor Area Widths: Examples of Very Long Clear Floor Area Lengths: Examples of People with Very Limited...
-
§ 36.304(g) Limitation on barrier removal obligations
(g) Limitation on barrier removal obligations....
-
223.1 General
Because medical facilities frequently reconfigure spaces to reflect changes in medical specialties, 223.1 does not include a provision for dispersion of accessible patient or resident sleeping...