LR6000 Hospital Latch Wide Paddle Cylindrical Hospital Latch 1-3/4" standard door thickness (specify if different) Meets ADA requirements ...
Search Results "Applicable Standard"
Commonly Searched Documents
- Architectural Builders Hardware Mfg., Inc. 6000 Series Wide Paddle Cylindrical Hospital Latch
- Bradley Angle Frame Mirror 780
- LifeGuard Pool Lift #100287
- Landscape Forms Inc. Scarborough Bench Collection
- Proline Drain
- Populas Accella Adjustable Activity / Computer Workstation
- AccessRec De-Bug All Terrain Wheelchair
- Bradley Channel Frame Mirror 781
-
A. Statutory and Rulemaking History Up to the 2008 NPRM
Appendix A of the title III regulation, at 28 CFR part 36, contains the ADA Standards for Accessible Design....
- Pennsylvania Office of Vocational Rehabilitation (OVR)
-
Section 1193.39 Prohibited reduction of accessibility, usability and compatibility [1193.29 in the NPRM] (Section-by-Section Analysis)
Providing that no change shall be undertaken which decreases or has the effect of decreasing accessibility is a common principle in disability access codes and standards and was borrowed...
-
§1607.7 Use of other validity studies.
While publishers of selection procedures have a professional obligation to provide evidence of validity which meets generally accepted professional standards (see section 5C above), users...
-
Chapter 1 GENERAL INFORMATION
It addresses the four elements of "standard" building evacuation information that apply to everyone but that may require modification or augmentation to be of use to people with disabilities...
-
M301.2.1, M302.2.1 Transfer Height
The Standard of Care for healthcare organizations is to have a pressure-relieving surface on the stretcher to help prevent pressure ulcers....
-
3.3.1 Research Data
Access Board staff to find as many studies as possible that were relevant to various accessibility standards....
-
Maximum side reach ranges. (Section-by-Section Analysis)
The 2004 ADAAG includes a change in the maximum height of a side reach range from 54 inches in the current ADA Standards, to 48 inches in the 2004 ADAAG. ...
-
Comments
transportation commenters suggested that a longer-term solution to the problem would be to work with wheelchair manufacturers and the Department of Health and Human Services to establish standards...
-
206.2.3 Multi-Story Buildings and Facilities
Florida requirements may be waived down to the ADA Standards requirements....
-
T402 Ramps and Bridgeplates
important that any potential revision of requirements for minimum design loads for ramps be coordinated with design loads for public lifts specified in the Federal Motor Vehicle Safety Standards...
-
409.1 General (Section-by-Section Analysis)
This proposed requirement in 409.1 would be new to the 508 Standards....
-
Water Hydrants
Standard handpumps require a force greater than 5 pounds (2.2 newtons) and a long reach to operate....
-
III-1.7000 Relationship to title II
In cases where the standards differ, the stadium would have to meet the standard that provides the highest degree of access to individuals with disabilities....
-
F - number system
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the construction...