Product Features and Benefits: 1- or 3-hole installation Rigid spout 4 1/2" long, 6" high 5 1/4" from deck to aerator Metal joystick...
Search Results "Push Plate"
- Delta Single Hole Single Handle 4″ plate 552TLF
- Don-Jo Mfg., Inc. Commercial Kick Plates 90
-
404.2.9 Door and Gate Opening Force
The force for pushing or pulling open a door or gate other than fire doors shall be as follows: 1. Interior hinged doors and gates: 5 pounds (22.2 N) maximum. 2....
- AJW Architectural Products U719 96"W x 48"H J-Mold Mirror - Four Sided Frame - Plate Glass
-
11B-404.2.4.1 Swinging doors and gates
unless noted) From front Pull 60 inches (1524 mm) 18 inches (457 mm)5 From front Push...
-
A4.13.9 Door Hardware
Some disabled persons must push against a door with their chair or walker to open it....
-
Inventory Control Devices
A minimum 12 inch clearance is required on the push side of swinging doors when the door has both a closer and a latch....
-
§ 38.83(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section and sufficient clearances to permit at least two wheelchair or mobility aid users to reach areas...
-
Toilet Rooms-Banquet Area
The force required to push or pull open the doors to the women's and men's toilet rooms designated as accessible is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf...
-
Toilet Rooms North (Celebrity Spies)–Men [sic]
The force required to push or pull open the men's toilet room door is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf. See Standards § 4.13.11(2)(b). ee....
-
Maneuvering Clearances at Doors [4.13.6]
Latch-side clearance is needed on the push side to be able to operate a latch and maneuver through the door against the force of a closer....
-
1133A.6 Kitchen sink faucet controls
Lever-operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
1134A.8, Item 7
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
10.4.1(5)
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor....
-
Double Action Door Pressure Gauge
Double Action Door Pressure Gauge This Door Pressure Gauge, available from Evan Terry Associates, has Push-Pull capability and measures forces from 0-35 pounds on one side and 0-16...
-
1134A.8, Item 7
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
- Haws Drinking Fountain Demonstration Video
-
10.3.1(19)
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor....
-
Measuring Door Openings
Door handles and push bars should not be included in the measurements of door opening widths....
-
Tips for Communicating with Individuals with Mobility Impairments
Do not assume the individual wants to be pushed —ask first. Offer assistance if the individual appears to be having difficulty opening a door....
- Rockwood Manufacturing Company 11047 Series 47 Straight Single Bar Set 8" Pull CTC
-
4.13.11* DOOR OPENING FORCE
The maximum force for pushing or pulling open a door shall be as follows: (1) Fire doors shall have the minimum opening force allowable by the appropriate administrative authority....
-
Interacting with People with Physical Disabilities
When pushing people using a wheelchair, let them know that you are ready to push. Be aware of the distance between the chair and other people to avoid clipping their heels....
-
11B-106.5 Defined terms
COMPONENT GUARD HANDRAIL HEALTH CARE PROVIDER HISTORICAL BUILDINGS HOUSING AT A PLACE OF EDUCATION IF, IF…THEN INTERNATIONAL SYMBOL OF ACCESSIBILITY KEY STATION KICK PLATE...