ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
Search Results "Pedestrian Signal"
Commonly Searched Documents
-
F105.2.1 ANSI/BHMA
-
105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
[2010 ADAS] 105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors(see 404.3)....
-
2. Background
A trail would be defined for purposes of these accessibility guidelines as a pedestrian route developed primarily for outdoor recreational purposes....
- Federal Highway Administration (FHWA): ADA/Section 504 Programs
-
R302.5.5 Regulatory Constraints
As proposed in the NPRM, R302.5 would require the grade of pedestrian access routes contained within a street or highway right-of-way, except at pedestrian street crossings, to not exceed...
-
AUTOMATIC DOOR
A door equipped with a power operated mechanism and controls that open and close the door automatically upon receipt of a momentary actuating signal....
-
CURB RAMP
A sloping pedestrian way, intended for pedestrian traffic, which provides access between a walk or sidewalk and a surface located above or below an adjacent curb face....
- Besam SW200i Overhead Concealed Swing Door Operator
-
10 [§ 4.7.5]
Curb ramps must have flared sides unless pedestrians would not normally walk across the ramp....
-
R101.1 General
This document contains scoping and technical requirements to ensure that facilities for pedestrian circulation and use located in the public right-of-way are readily accessible to and usable...
-
Substantive changes made to requirements for elevators
(407.2.1.1) removal of a specification concerning objects located below hall call buttons (407.2.2 in the proposed rule) modification of specifications for audible hall signals...
-
Visual Alarms [4.28.3]
Visual Alarms [4.28.3] In general, it is not sufficient to install visual signals only at audible alarm locations....
-
Shared Use Path
A multi-use path designed primarily for use by bicyclists and pedestrians, including pedestrians with disabilities, for transportation and recreation purposes....
-
Beach Access Route
A continuous, unobstructed path designed for pedestrian use that crosses the surface of a beach or that leads from a pedestrian access point to the high tide level at tidal beaches; mean...
-
4.28.3(3)
The pulse duration is defined as the time interval between initial and final points of 10 percent of maximum signal....
-
4.3.11.4* Two-way Communication
A method of two-way communication, with both visible and audible signals, shall be provided between each area of rescue assistance and the primary entry....
-
WALK
[DSA-AC] An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts. (As differentiated from the definition of “Sidewalk”.)...
-
WALK
[DSA-AC] An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts. (As differentiated from the definition of “Sidewalk”.)...
-
11B-806.3 Guest rooms with communication features
To ensure communication within the facility, as well as on commercial lines, provide telephone interface jacks that are compatible with both digital and analog signal use....
-
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis)
and Blended Transitions (R309.4) (Section-by-Section Analysis) Curb ramps or blended transitions must connect the access aisle serving each accessible on-street parking space to the pedestrian...
-
WALK
[DSA-AC] An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts. (As differentiated from the definition of “Sidewalk”.)...
-
R305.2.3 Blended Transitions
Where raised pedestrian street crossings, depressed corners, or other level pedestrian street crossings are provided, detectable warning surfaces shall be placed at the flush transition...