Rationale for final recommendation Having an accessible transfer surface height is critical to facilitate independent patient transfers to equipment used by patients both in a supine,...
Search Results "Patient Seated in Wheelchair"
-
5.1.4 Transfer Surface Height Measurement for M301 and M302
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
11B-610.3.2 L-shaped seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
How Can You Overcome These Barriers to Work with Your Providers?
There are many things that a person with a disability can do to improve his or her quality of health care and break down the barriers that compromise care. The following suggestions...
- Hoyer Journey Stand-Up Lift
-
What is a “wheelchair”?
Section 37.3 of the DOT regulations implementing the Americans with Disabilities Act of 1990 (ADA) (49 CFR Parts 27, 37, and 38) defines a “wheelchair” as a mobility aid belonging...
-
What is a “wheelchair”?
Section 37.3 of the DOT regulations implementing the Americans with Disabilities Act of 1990 (ADA) (49 CFR Parts 27, 37, and 38) defines a “wheelchair” as a mobility aid belonging to any...
-
5.3.3 Transfer Sides Recommendations for M302
This provision will coincide with the seat area design of most examination chairs. NPRM Proposed Provision: M302.2.3 Transfer Sides....
-
4.1.1 Range of Examination Table and Chair Configurations
Equipment designed for patients seated or in semi-supine positions (M302) Examination chairs Dental chairs Optometric chairs Otolaryngology (ENT) chairs...
-
11B-610 SEATS
[See subsections ...]
-
11B-610 Seats
[See subsections ...]
-
3. Stowage Space for Wheelchairs
with 100 or more passenger seats have a priority space to stow at least one passenger wheelchair....
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
A4.33.3 Placement of Wheelchair Locations
The location of wheelchair areas can be planned so that a variety of positions within the seating area are provided. This will allow choice in viewing and price categories....
-
Seat “Blocking” Method
Seat “Blocking” Method Carriers may “block” an adequate number of seats to provide the seating accommodations discussed above....
-
Depth: ADA Standard Section 802.1.3
Where a wheelchair space can be entered from the front or rear, the wheelchair space shall be 48 inches (1220 mm) deep minimum....
- International Society of Wheelchair Professionals (ISWP)
-
Figure M3: Overview of M302 Diagnostic Equipment for Use by a Patient in a Seated Position
[See subsections ...]
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.3.3
Section 608.3.3 covers the current ADA Standards for grab bars in alternate roll-in type shower compartments.
-
Width: ADA Standard Section 802.1.2
A single wheelchair space shall be 36 inches (915 mm) wide minimum Where two adjacent wheelchair spaces are provided, each wheelchair space shall be 33 inches (840 mm) wide minimum....
-
18 Inch Low Height
Edward Steinfeld, the principal author of the Analysis of Seat Height for Wheeled Mobility Devices, stated 17 inches is the best practice as it accommodates approximately 94% of individuals...
-
A4.33.3 PLACEMENT OF WHEELCHAIR LOCATIONS
The location of wheelchair areas can be planned so that a variety of positions within the seating area are provided. This will allow choice in viewing and price categories....
- AccessRec De-Bug All Terrain Wheelchair