The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
Search Results "Shall"
-
11B-609.3 Spacing
-
11B-208.3.2 Residential facilities
features complying with Sections 11B-809.2 through 11B-809.4, and adaptable features complying with Chapter 11A, Division IV, parking spaces provided in accordance with Section 11B-208.2.3.1 shall...
-
11B-220.2 Point-of-sale devices
Where point-of-sale devices are provided, all devices at each location shall comply with Sections 11B-707.3 _|Operable Parts|_, 11B-707.7.2 _|Characters|_, and 11B-707.9 _|Point-Of-Sale...
-
1136A.1 Receptacle heights
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the...
-
11B-404.1 General
Doors, doorways, and gates that are part of an accessible route shall comply with Section 11B-404. Exceptions: 1....
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
11B-809.12 Electrical receptacles, controls and switches
Where the reach is over an obstruction, electrical receptacles, controls and switches shall comply with Sections 11B-309.2 and 11B-308.3....
-
11B-208.3.2 Residential facilities
with Sections 11B-809.2 through 11B-809.4, and adaptable features complying with Sections 11B-809.6 through 11B-809.12 parking spaces provided in accordance with Section 11B-208.2.3.1 shall...
-
11B-227.2 Check-out aisles
Where check-out aisles are provided, check-out aisles complying with Section 11B-904.3 shall be provided in accordance with Table 11B-227.2....
-
11B-227.2 Check-out aisles
Where check-out aisles are provided, check-out aisles complying with Section 11B-904.3 shall be provided in accordance with Table 11B-227.2....
-
11B-232.1 General
Cells with mobility features shall be provided in each classification level. 2) Alterations to detention and correctional facilities. ...
-
REPORTING AND ENFORCEMENT
This Agreement shall become effective as of the date of the last signature below and shall remain in effect for three (3) years from that date. 26....
-
III. ARCHITECTURAL ACCESS
Upon its completion, this report shall be provided to Plaintiffs’ counsel and the third-party Facilitator (provided for in ¶¶ 24-25), but shall otherwise remain confidential....
-
F233.4.5 Dispersion
Residential dwelling units required to provide mobility features complying with 809.2 through 809.4 and residential dwelling units required to provide communication features complying with 809.5 shall...
-
233.3.5 Dispersion
Residential dwelling units required to provide mobility features complying with 809.2 through 809.4 and residential dwelling units required to provide communication features complying with 809.5 shall...
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
11B-408.1 General
Limited-use/limited-application elevators shall comply with Section 11B-408 and with ASME A17.1. They shall be passenger elevators as classified by ASME A17.1....
-
11B-206.4.4.1 Location
transportation facilities, where different entrances serve different transportation fixed routes or groups of fixed routes, entrances serving each fixed route or group of fixed routes shall...
-
11B-206.2.15 Golf facilities
At least one accessible route shall connect accessible elements and spaces within the boundary of the golf course....
-
1009.2.7 Operation
The lift shall be capable of unassisted operation from both the deck and water levels....
-
11B-904.4 Sales and service counters
Sales counters and service counters shall comply with Section 11B-904.4.1 or 11B-904.4.2....
-
F233.3.4 Dispersion
Residential dwelling units required to provide mobility features complying with 809.2 through 809.4 and residential dwelling units required to provide communication features complying with 809.5 shall...
-
502.3.4 Location
Access aisles shall not overlap the vehicular way....
-
1012.2 Height
Guards shall form a protective barrier not less than 42 inches (1067 mm) high, measured vertically above the leading edge of the tread, adjacent walking surface or adjacent seatboard....