Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
Search Results "Door Surface"
-
308.3.1 Unobstructed
-
A10.3.1(7) Route Signs
One means of making control buttons on fare vending machines usable by persons with vision impairments is to raise them above the surrounding surface....
-
7.4.11.2 Sign Contents
constructed or altered trails, regardless of whether the trail is accessible, the signs shall include at minimum the following information: Length of the trail or trail segment Surface...
-
Detectable Warnings [4.29]
ADAAG originally required detectable warnings on curb ramps, at areas where walking surfaces blend with vehicular ways without curb separation, railings, or other elements, and at the edges...
-
Constructed Features in Recreation Sites
If constructed features are replaced, but the ground under the feature isn't changed, the surface and slope of the ground under the feature doesn't have to be brought into conformance with...
-
1013.2 Clear Ground Space
This section also requires the surface of the clear ground space to be firm and stable and to allow the use of tent stakes or other tent securement devices....
-
Selection of Participants
investigators at OSU were to pilot test the survey instruments with professional contacts in parks and recreation that manage pedestrian trails designed, developed, and maintained with the natural surface...
-
1016.4 Passing Spaces
inches (1525 mm), where the route is: • Heavily used or adjoins elements, space, or facilities that are heavily used; or • A boardwalk or otherwise not at the same level as the ground surface...
-
1134A.5, Item 1
The edge of the clear floor space shall be flush with the control wall surface....
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
1. Access Barrier Removal in Existing Pedestrian Facilities
administrative fixed costs of or relating to the following types of improvements: (1) installation of missing curb ramps; (2) repair of damage that tree roots have caused to sidewalk or walkway surfaces...
-
11B-101.2 Reserved.
; 9) Installing offset hinges to widen doorways; 10) Eliminating a turnstile or providing an alternative accessible path; 11) Installing accessible door hardware;...
-
11B-101.2 Reserved.
; 9) Installing offset hinges to widen doorways; 10) Eliminating a turnstile or providing an alternative accessible path; 11) Installing accessible door hardware;...
-
8.4 Improving Data Sources and Research
For example, the Committee was making recommendations about standards for transfer surfaces of certain sizes....
-
11B-201.1 Scope, 11B-201.2 Application based on building or facility use, 11B-202.2 Additions, 11B-202.3 Alterations
Example: A facility proposes to replace several of the windows and doors in a hospital. This type of replacement project affects a small portion of many rooms within a building....
- Bradley Terreon Classroom Sink TCS Series
- Inclusion Solutions Model 2000 Voting Booth (Hard Curtain)
- Inclusion Solutions Model 2000 Voting Booth with Light (Hard Curtain)
- Inclusion Solutions Poll Star Voting Booth
- Excel Dryer, Inc. XLERATOR® Hand Dryers
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
The features that make this possible are: an accessible route to and through the room; an entry door with adequate clear width, maneuvering clearance, and accessible hardware;...
-
Ambulatory Accessible Toilet Compartments
Ambulatory accessible stalls feature parallel grab bars on both sides and a self-closing door and are designed to accommodate people who may have difficulty walking, sitting, or rising....