Individuals who wear prosthetics are unable to operate some types of products because they either require motions that cannot easily be made with a prosthetic hand, or because products are designed...
Search Results "Elevator Car Designation"
-
Paragraph (c) (Advisory Guidance)
-
§ 38.57(b)
Space to accommodate wheelchairs and mobility aids may be provided within the normal area used by standees and designation of specific spaces is not required....
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
1002.4.4.2 Side Entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
806.4 Hotel, Motel and Condominium Special Accessibility Features
(ii) All beds in designed accessible guest rooms shall be open-frame type that allows the passage of lift devices. (iii) Water closets that comply with section 604.4....
-
1002.4.4.2 Side Entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
In Your Guest Room:
Generally, it is located near the exit or stairwell door or elevators. Read the instructions on how to use it or have someone instruct you on how to activate the alarm. 2....
-
EXHIBIT I NOTICE OF SETTLEMENT OF FEDERAL DISABILITY DISCRIMINATION LAWSUIT UNITED STATES V. QUIKTRIP CORPORATION
information on how to submit a claim in several ways: (1) by sending an email with your name, address, and telephone number requesting claim information to [insert email address to be designated...
-
2010 ADA Standards
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
36 CFR Part 1191 ADA and ABA Accessibility Guidelines for Emergency Transportable Housing Units
Department of Justice (DOJ) is required to update its accessibility standards for the design, construction, and alteration of facilities (other than certain transportation facilities) by...
-
Surface [1017.2]
DESIGN TIP—Building a firm and stable surface A firm and stable surface does not always mean concrete and asphalt....
-
5.4.3 Transfer Support Height for M301 and M302
Manufacturers of such equipment on the committee determined that this recommendation did not conflict with IEC 60601-2-52, allowing equipment to be designed to provide both accessibility...
-
4.3 Diagnostic Imaging Equipment
4.3 Diagnostic Imaging Equipment Diagnostic imaging equipment encompasses a broad range of technologies comprised of integrated systems of components and accessories with diverse designs...
-
1.9.1 Division of the State Architect ─ Access Compliance
The purpose of this code is to ensure that barrier-free design is incorporated in all buildings, facilities, site work and other improvements to which this code applies in compliance with...
-
4. c. CUSTOMER SERVICE and COMMUNICATION and ACCESS
Topics include: Policies & Procedures Customer Communications Accessible Design Removing Barriers Alternative Access...
-
Selecting a TTY
Connection to Phones and Phone Lines When selecting a TTY with acoustic couplers, consider the design of telephone handsets....
-
220 Automatic Teller Machines and Fare Machines
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(20) Where automated...
-
Horizontal Alignment
This point is represented by the coefficient of friction used in the minimum design radius equations of AASHTO....
-
Economic and Technical Impacts
diagnostic equipment does not currently incorporate features that conform to all the technical criteria proposed in Chapter M3, which technical criteria can be easily incorporated into the design...
-
104.1.1 Construction and Manufacturing Tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
104.1.1 Construction and Manufacturing Tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
Department of Housing and Urban Development under the Fair Housing Act
This rule updates guidelines used to enforce the design requirements of the ADA and the ABA....
-
EXHIBIT B
"Mobile Applications" includes all software applications made available to the public directly or indirectly by Peapod designed to run on smartphones, tablet computers, or other mobile devices...