Because the flatness of wood and concrete substrates can change over time, it is recommended that the designer make provisions for evaluating substrate flatness just before installation...
Search Results "Elevator Car Designation"
Filters
Commonly Searched Documents
-
Accessibility - Flatness and Lippage
-
Standing Supports (M304.3 and M305.3)
Tilley, The Measure of Man & Woman: Human Factors in Design, (New York, John Wiley and Sons, 2002), page 43....
-
§ 382.61 Training
(7) Current employees of each carrier designated as complaints resolution officials, for purposes of § 382.65 of this part, shall receive training concerning the requirements of this...
-
Accessible Route
The list of exceptions specifies alternate design requirements applicable to these structures which, because of water level variables, cannot comply with the slope, cross slope, and handrail...
-
36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way; Shared Use Paths (SNPRM)
Shared use paths are multi-use paths designed primarily for use by bicyclists and pedestrians, including pedestrians with disabilities, for transportation and recreation purposes....
-
4.1.3 Adjustable Height Chairs with and without Footplates
a minimum 2” clearance is required from the floor to the bottom of the footplate as specified by domestic UL and International Electrotechnical Commission (IEC) standards (as currently designed...
-
A. Statutory and rulemaking history
The ADA also requires newly designed and constructed or altered State and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable...
-
Safe harbor for qualified small businesses regarding what is readily achievable. (Section-by-Section Analysis)
Commenters were concerned that, absent a standard, unsafe or ineffective design practices might be undertaken. ...
-
§35.130(d) and §35.130(e) (Section-by-Section Analysis)
Section 501(d) was designed to clarify that nothing in the ADA requires individuals with disabilities to accept special accommodations and services for individuals with disabilities that...
-
Transition Plans
Since the 1968 passage of ABA, facilities designed, built, altered, bought, rented, or leased by, for, or on behalf of a Federal agency have been required to be accessible....
-
The History of Accessibility Guidelines
ADA Standards for Accessible Design (ADASAD) of 2010. The U.S....
-
Reach Ranges and Operability Requirements
One of the basic principles of universal design and accessibility is to provide controls that most people can reach and use....
-
ADAAG
Children's Environments In January 1998 the Access Board published final guidelines for building elements designed for use by children....
-
3. b. Government Assistance
Topics include: Policies & Procedures Customer Communications Accessible Design Removing Barriers Alternative Access...
-
2.2.6 Door Use
2.2.6 Door Use Our study of door use had three main objectives all intended to provide groundwork for future studies aimed at design guidelines and standards that would make doors more...
-
11B-206.2.1 Site arrival points
Department of Transportation and most State departments of transportation are revising their design standards and regulations for the public right of way based on recent research and guidelines...
-
36 CFR Part 1193 Telecommunications Act (Section 255) Accessibility Guidelines - Preamble
The Act requires manufacturers of telecommunications equipment and customer premises equipment to ensure that the equipment is designed, developed, and fabricated to be accessible to and...
-
Section 36.204 Administrative Methods (Preamble, Section-by-Section Analysis)
The Court then noted: ‘‘These statements would ring hollow if the resulting legislation could not rectify the harms resulting from action that discriminated by effect as well as by design...
-
Part II: ABA Application and Scoping
The ABA covers facilities that are designed, built, altered, or leased with Federal funds....
-
Public Address Systems
Since this requirement would have been more pertinent to facility operations than to facility design, the Board did not include it in the final rule....
-
ATM Clear Floor or Ground Space
Comments from industry noted that it would be difficult to achieve this requirement in the design of controls activated by touch....
-
Diagonal Curb Ramps
does not have to be horizontally straight to provide such a cue and that achieving straight segments two feet long within marked crossings is very difficult under standard intersection design...
-
9.5 Do the ADA's Pre-Employment Inquiry and Confidentiality Restrictions Prevent an Employer from Filing Second Injury Fund Claims?
Most states have established "second injury" funds designed to remove financial disincentives in hiring employees with a disability....
-
11B-216.12 Amusement rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...