required to ensure that, where necessary to avoid discrimination, employment tests are modified so that the test results reflect job skills or aptitude or whatever the test purports to measure...
Search Results "Measuring Instrument"
-
II-4.3300 Nondiscrimination in selection criteria and the administration of tests
-
11B-813.2.1.2 Clearance
At both ends of adult changing tables, clearance shall be provided measuring 36 inches (914 mm) minimum wide and a minimum length as long as the table width plus the width of the side clearance...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
National Alliance for Accessible Golf (Alliance)
Augustine, FL, and is governed by a Board of Directors representing those organizations instrumental in forming the Alliance and administered by an Executive Director along with a Grant...
-
What Testing Accommodations Must Be Provided?
entities must ensure that the test scores of individuals with disabilities accurately reflect the individual’s aptitude or achievement level or whatever skill the exam or test is intended to measure...
-
R&D Workshop Trim-A-Slab Intro Video
Watch the videos in this series for detailed information on planning, measuring, and installing Trim-A-Slab, the easiest to install of any expansion joint repair....
-
a. Tests and Examinations
Tests and Examinations Accommodations may be needed to assure that tests or examinations measure the actual ability of an individual to perform job functions, rather than reflecting limitations...
-
CONTENTS
Providers Benefits and Costs: Overview Cost of Equipment Costs to Lower Minimum Table Height Scoping Scenarios: Range of Possibilities Benefits and Costs: Summary How to Measure...
-
Notes:
Given the differing shapes of mammography devices, defining the dimensions in relationship to each other with a static measurement point for the breast platform assures accessibility despite...
-
ADA Checklist for Existing Facilities
One person can take measurements and the other person can fill out the checklist and take photos....
-
Test Procedures
Maximum g levels and head injury criteria (HIC) were measured....
-
Kawneer North America 190/350/500 Standard Entrances
The 190 Narrow Stile Entrance Is engineered for moderate traffic in applications such as stores, offices and apartment buildings Vertical stile measures 2-1/8" (54); top rail 2-1...
-
D. Election Day Compliance Review
In the materials provided to each Chief Election Official for Election Day, the City will include a checklist of the temporary measures to be implemented on Election Day at each polling...
-
National Safety Council (NSC)
Working to make the world measurably safer, NSC advances this mission by engaging businesses, government agencies, elected officials and the public to help prevent the fifth leading cause...
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum measured...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
Back Support: ADA Standard Section 903.4
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
11B-407.2.2.3 Audible signals
The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. Exceptions: Reserved. Reserved....
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum measured...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-407.2.2.3 Audible signals
The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. Exceptions: Reserved. Reserved....
-
8 [§§ 4.3.3; 4.3.7]
The measurement should extend from where the ramp run meets the level sidewalk (at the lower end of the arrow) to the opposite edge of the sidewalk (where the sidewalk meets the grass)....
-
E102.3 ANSI/IEEE (Section-by-Section Analysis)
E102.3 ANSI/IEEE (Section-by-Section Analysis) ANSI/IEEE C63.19-2011, American National Standard for Methods of Measurement of Compatibility between Wireless Communications Devices and...
-
5.3.2.1 Size
The clear floor or ground space shall be 60 inches (1525 mm) wide minimum measured parallel with the back of the pit toilet, and 56 inches (1420 mm) deep minimum measured parallel to the...
