Accessibility design often involves many small details, so discussions like this are very valuable for architects and facility managers. Cowboy Safari
Search Results "Character Height (Raised)"
-
Re: Rockwood Manufacturing Company BFM688 BFM Series Women's ADA Toilet Room Molded Plastic Sign
-
11B-504.2 Treads and risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum....
-
11B-504.2 Treads and risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum....
-
11B-703.4.1 Height above finish floor or ground
mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...
-
11B-703.5.10 Format
Text shall be in a horizontal format.
-
11B-703.5.10 Format
11B-703.5.10 Format. Text shall be in a horizontal format.
-
11B-703.5.10 Format
Text shall be in a horizontal format.
-
19 Inch Low Height
raised (load) position....
-
Accessible Counter Height
Where only a portion of a counter is made accessible, these commenters advised that the maximum height should be 32 inches....
-
Height: ADA Standard Section 611.4
Section 611.4 covers the current ADA Standards for the height of the laundry compartment in top loading machines and front loading machines.
-
ADA Sign Depot Exit Sign with Tactile Text and Grade 2 Braille - 5" x 3"
ADA Exit Sign - 5"x3" ADA compliant non-glare matte finish ADA compliant font and tactile (1/32 inch raised) letters ADA compliant 5x3 size and 1-inch letter height...
-
6. Minimum (Low) Height Standard for Transfer Surfaces
Minimum (Low) Height Standard for Transfer Surfaces As indicated in Section 5.1.1, the MDE Advisory Committee recommends that equipment with transfer surfaces be height adjustable in...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
Humanscale Float Height-Adjustable Table
Float is a revolutionary standing office desk that brings effortless operation to traditional sit-stand products. Ease of use is at the heart of Float, as it seamlessly adjusts...
-
SetonGlo™ ADA Braille Signs - Exit Route
Glow-in-the-dark signs identify vital fire equipment and egress signs when the power goes out Size - 7-7/8"W x 7-7/8"H Tactile lettering and braille 1/8" thick Black acrylic...
-
(4) Adjustability: Method of Measurement
The MDE NPRM proposed that the measurement of the height of the transfer surface for both diagnostic equipment used in the supine, prone, or side-lying position and diagnostic equipment...
-
1011.4.1 Height
The tops of picnic tables shall comply with 902.3.
-
1011.4.1 Height
The tops of picnic tables shall comply with 902.3.
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
Effect of Handhelds on Transfer Height
Participant preference for grab bars and backrest heights for protocols B through E are shown in Table 17. For all protocols the tall grab bars were preferred....
-
407.3.1 Identification (Section-by-Section Analysis)
It also would require key surfaces outside active areas of display screens to be raised above their surrounding surfaces....
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
