The section also requires at least one wheelchair space to be provided for each 24 linear feet of usable picnic table surface perimeter....
Search Results "Parking Space Width"
-
1011.4 Picnic Tables
- Voice Dream Writer App
-
Ramps
They must meet the ADA's requirements regarding slope, width, landings, handrails, and edge protection....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
diagnostic equipment used by patients in the seated position required transfer surfaces to have the option to transfer from a mobility device onto one short side (depth) and one long side (width...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Accessible Routes on the Playing Surface
The orientation of the length and the width have not been specified for added flexibility in design. Slopes on landings must be no more than 1:20 (5%)....
-
Alternative Golf Car Passage
A golf car passage can be substituted for all or part of the accessible route connecting elements within the boundary of the course and must be a minimum of 48 inches in width....
-
1.1.17 Stairs
For stairs 60 in. (1520 mm) or less in width, measure along a line approximately 18 in. (460 mm) from the wall or outside edge of the stair....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Railings—Guardrails, Handrails, and Safety
For safety, the International Building Code (IBC), http://www.iccsafe.org, section 1003.2.12 contains requirements for guardrail height and the spacing of rails where there is a drop off...
-
Appendix 4 – References
Kilkenny, South Australia: Regency Park Centre for Young Disabled. Stait, R.E., Stone, J., and Savill, T.A. (2000). ...
-
11B-206.2.15 Golf facilities
At least one accessible route shall connect accessible elements and spaces within the boundary of the golf course....
-
11B-206.2.15 Golf facilities
At least one accessible route shall connect accessible elements and spaces within the boundary of the golf course....
-
11B-409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by Section 11B-409.4.1....
-
5. Curb ramps
Accessible element or space ANSI A117.1 section APPLICATION 5. Curb ramps 4.7 Accessible routes crossing curbs....
-
12162(a)(3)(B) Location
(B) Location Spaces required by subparagraph (A) shall be located in single-level rail passenger coaches or food service cars....
-
1133A.7, Item 2
The knee and toe space shall be 30 inches (762 mm) wide minimum, centered on the sink, countertop or appliance....
-
409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by 409.4.1....
-
305.4 Knee and Toe Clearance
Unless otherwise specified, clear floor or ground space shall be permitted to include knee and toe clearance complying with 306....
-
9.2.2 Minimum Requirements
An accessible unit, sleeping room or suite shall be on an accessible route complying with 4.3 and have the following accessible elements and spaces....
-
4.3.1* General
All walks, halls, corridors, aisles, skywalks, tunnels, and other spaces that are part of an accessible route shall comply with 4.3....
-
11B-409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by Section 11B-409.4.1....