For the purpose of the FSTAG a trailhead is an outdoor space that is designated by the entity responsible for administering or maintaining the trail to serve as a primary access point to...
Search Results "Parking Space Length"
-
Trailhead
-
5.7 Raised Platforms
In banquet rooms or spaces where a head table or speaker’s lectern is located on a raised platform, the platform shall be accessible in compliance with 4.8 or 4.11....
-
4.32.3 Knee Clearances
If seating for people in wheelchairs is provided at tables or counters, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided (see Fig....
-
ADAPTABILITY
The ability of certain building spaces and elements, such as kitchen counters, sinks, and grab bars, to be added or altered so as to accommodate the needs of either disabled or nondisabled...
-
(2)
(2) Accessible restrooms should be in close proximity to at least one seating location for persons using mobility aids and should be connected to such a space by an unobstructed path having...
-
F219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided....
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
T208.2.2 Doorways on Two Sides of vehicle
Where non-rail vehicles have doorways on two sides, a passenger access route shall connect each wheelchair space to doorways on both sides of the vehicle that provide a means of accessible...
-
Water Closets [4.16]
Clear floor space requirements at a toilet not located in a stall are different from those for a toilet within a stall....
-
4.1.7(3)(d)
(d) Accessible routes from an accessible entrance to all publicly used spaces on at least the level of the accessible entrance shall be provided....
-
4.1.7(2)(d)
(d) Accessible routes from an accessible entrance to all publicly used spaces on at least the level of the accessible entrance shall be provided....
-
Trail
A pedestrian route provided primarily to connect elements, spaces, or facilities within a site is not a trail; it is an outdoor recreation access route (ORAR)....
-
DORMITORY
A space in a building where group sleeping accommodations are provided in one room, or in a series of closely associated rooms, for persons not members of the same family group, under joint...
-
DORMITORY
A space in a building where group sleeping accommodations are provided in one room, or in a series of closely associated rooms, for persons not members of the same family group, under joint...
-
219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided....
-
212.3 Sinks
Where sinks are provided, at least 5 percent, but no fewer than one, of each type provided in each accessible room or space shall comply with 606....
-
306.2.4 Additional Clearance
Space extending greater than 6 inches (150 mm) beyond the available knee clearance at 9 inches (230 mm) above the finish floor or ground shall not be considered toe clearance....
-
Assistive Listening System (ALS)
An amplification system utilizing transmitters, receivers, and coupling devices to bypass the acoustical space between a sound source and a listener by means of induction loop, radio frequency...
-
Section 1.0 Background
These individuals may have conditions that affect their abilities to maneuver devices in small spaces or reach objects....
-
American Safety Tread Co., Inc. Stair Nosing Style 950
Maximum length: 6’ 6” Dimensions: 2-1/2" x 2-1/2" x 1/2" Anchor Options: Ships standard with Cast-On Anchors....
-
American Safety Tread Co., Inc. Stair Nosing Style 850
Maximum length: 6’ 6” Dimensions: 1-1/2" x 1-1/2" x 3/8" Anchor Options Ships standard with Cast-On Anchors Choice of Metals Alumacast: Corrosion resistant...
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-P
Latching Panic thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length. Allow 3/8" door clearance....
-
PEMKO 5 1/8" Thermal Barrier Threshold No. 252X3-FG
Thermal Barrier thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
-
PEMKO 7" Half Saddle/Offset Saddle Threshold No. 2727
Half Saddle/Offset Saddle thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
