Slip-resistant Surface for Suitcase Ramp The surface of the Suitcase Singlefold AS Ramp features an applied, slip-resistant surface....
Search Results "Transfer Surface Height"
- EZ-ACCESS Suitcase Singlefold AS Ramp
- Bradley Medium Capacity Towel Dispenser 2447
- Bradley 1-Station Express Lavatory System SS-1N
- American Standard Decorum 0.125 gpf Urinal System with Manual Flush Valve
- GameTime Roller Slide
- Watchdog The RELOCATOR Fire Alarm Pull Station
- Kohler Elevance Rising Wall Alcove Bath
- American Standard Brandon Centerset Bathroom Faucet
- Amramp Modular Ramps
-
Notes
accessing a health care provider’s office because of its physical layout or location. (5) being treated unfairly at a health care provider’s office.23 I The methods for measuring “low heights...
- Bradley Medium Capacity Towel Dispenser / 3.7 Gallon Waste Receptacle 2027
- Bradley 12 Gallon Waste Receptacle 3565
- Bradley 16.5 Gallon Waste Receptacle 356
- American Safety Tread Co., Inc. Cast Metal Safety Stair Nosing Style 801
-
B. What Is a Curb Ramp?
The gutter is the roadway surface immediately next to the curb ramp that runs along the curb. 1 28 C.F.R. Part 36, Appendix A, § 3.4....
-
R204.2 Pedestrian Circulation Paths
The NPRM proposed to define a pedestrian circulation path as a prepared exterior or interior surface provided for pedestrian travel in the public right-of-way. See R105.5....
-
809.2 Residential Dwelling Units with Mobility Features
809.2 Residential Dwelling Units with Mobility Features As discussed below, the final rule adds technical requirements to this section for floor surfaces, bedrooms, and weather alert...
-
604.7 Dispensers
paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of the gripping surface...
-
Location [§208.3]
Locating accessible spaces required for a parking structure in a surface lot often will not qualify for this exception because such a location typically offers less convenience, security...
-
Slope [§405.2] and Cross Slope [§405.3]
will accommodate most irregularities or variances due to construction methods or materials according to a study sponsored by the Board (“Dimensional Tolerances in Construction and for Surface...
-
Some existing measurement protocols
Some existing measurement protocols Currently there are no generally accepted measurement protocols for determining the slope, flatness, or waviness of floor surfaces in terms of accessibility...
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
with drop offs ½ inch or greater would be required to provide edge protection 2 inches high minimum on each side to prevent users from inadvertently travelling off the sides of the ramped surface...
-
1133A.2 Clear floor space
A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows either a parallel or a forward approach shall be provided at the work surface required by Section 1133A...
-
Alterations to Existing Facilities
For example, if an alteration project involves only installing pedestrian signals at existing intersections and there are no detectable warning surfaces on the curb ramps at the intersections...