Low resolution VMS characters shall comply with the pixel count for character width in Table 11B-703.8.5....
Search Results "Table"
Filters
Commonly Searched Documents
-
11B-703.8.5 Character width
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....
-
11B-703.8.9 Height above floor
Heights of low resolution variable message sign characters shall comply with Table 11B-703.8.4, based on the size of the characters on the sign....
-
Receivers: ADA Standard Section 219.3
Section 219.3 covers scoping requirements in the current ADA Standards for receivers for assistive listening systems.
-
11B-235.2 Boat slips
Boat slips complying with Section 11B-1003.3.1 shall be provided in accordance with Table 11B-235.2....
-
M301.2.1 Transfer Surface Height
Some CT tables can currently meet an 18 or 19 inch height and with redesign, more tables for use with equipment with bores would be able to....
-
SCOPING SCENARIOS: RANGE OF POSSIBILITIES
If the market adoption rate of adjustable tables were to match a requirement that one table of every five tables meet a 19 inch lower adjustable range when facility construction occurs,...
-
Slope: ADA Standard Section 405.2
Section 405.2 covers the current ADA Standards for slope requirements on ramps.
-
Diversified Woodcrafts - Forward Vision & Brad (Teacher Series) Promotional Video
Brad, a science teacher shares his thoughts on the Diversified Woodcrafts Forward Vision table....
-
Keypads: ADA Standard Section 407.4.7.2
Section 407.4.7.2 covers the current ADA Standards for designations and indicators on elevator keypads.
-
Boolee Voting Booth
Materials: 1” Aluminum Frame Table is ABS sheet All fasteners are zinc plated All side panel fabric is 300 x 300 urethane-coated polyester Design Specifications All weights and...
-
IMPLICATION OF A 19-INCH MINIMUM STANDARD FOR THE HIGHEST POINT IN THE LOWEST ADJUSTABLE POSITION
table or chair....
-
11B-604.9 Water closets and toilet compartments for children's use
When the exception in Section 11B-604.1 is used, the suggested dimensions of Table 11B-604.9 for a single age group shall be applied consistently to the installation of a water closet and...
-
Guest Rooms with Mobility Features: ADA Standard Section 224.2
Section 224.2 covers scoping requirements in the current ADA Standards for transient lodging guest rooms with mobility features.
-
Self-Service Storage Facilities: ADA Standard Section 225.3
Section 225.3 covers scoping requirements in the current ADA Standards for self-service storage facilities.
-
M301.3.1 Transfer Supports
With an exam table or chair there is additional table or chair “beyond” the transfer depth....
-
BENEFITS AND COSTS: OVERVIEW
COSTS: OVERVIEW Based on our analysis, we determined that transfer surface height requirements lower than 19 inches would increase the cost of designing and manufacturing examination tables...
-
2.4.1 Current Marketplace Dynamics
Typically, height adjustable tables today lower to about 19” from the floor.I Sales figures from examination table manufacturers indicate that in 2012, about 25% of examination tables sold...
-
M301.2.3 Transfer Surface Transfer Sides
Rationale: Diagnostic imaging equipment is accessed by all individuals from one of the long sides of the table....
-
Brewer 3000 LiftMate Low / High Patient Lift
patient lift from The Brewer Company, Brewer LiftMate™ is a safety-enhancing, step-saving solution that helps prevent patient falls and assists patients on to and off of any standard exam table...
-
11B-217.2 Wheelchair accessible telephones
Where public telephones are provided, wheelchair accessible telephones complying with Section 11B-704.2 shall be provided in accordance with Table 11B-217.2....
-
11B-225.3 Self-service storage facilities
Self-service storage facilities shall provide individual self-service storage spaces complying with these requirements in accordance with Table 11B-225.3....
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
407.12.3.2.1 Height
The height of the operable part shall conform to Table 407.12.3.2.1....
