First, we discussed in length the definitions/differences between examination tables and chairs to understand the medical equipment we are discussing....
Search Results "Hose Length"
Filters
Commonly Searched Documents
-
Introduction
-
704.10 Vertical exposure
are not required where the roof construction has a fire-resistance rating of not less than 1 hour for a minimum distance of 10 feet (3048 mm) from the adjoining building and the entire length...
-
11B-502.6.4.2
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
10.2.1(1)
(1) Where new bus stop pads are constructed at bus stops, bays or other areas where a lift or ramp is to be deployed, they shall have a firm, stable surface; a minimum clear length of 96...
-
6. ALTERNATIVES
Management and Budget (OMB) states that regulatory analyses should consider alternatives to the rule or regulation being evaluated.33 Thus, the Department considered alternatives regarding the length...
-
4.10.14* EMERGENCY COMMUNICATIONS
If the system uses a handset, then the length of the cord from the panel to the handset shall be at least 29 in (735 mm)....
-
Must elevator doors remain open for 20 seconds?
Reopening devices must remain effective for 20 seconds minimum, but in reopening, doors do not have to remain open for this length of time if unobstructed....
-
11B-705.1.2.3 Islands or cut-through medians
Exception: Detectable warnings shall be 24 inches (610 mm) minimum in depth at pedestrian islands or cut-through medians that are less than 96 inches (2438 mm) in length in the direction...
-
11B-812.7.2 Marking
Access aisle markings may extend beyond the minimum required length....
-
Landscape Forms Inc. Petoskey Bench Collection
Dimensions including support: 26in. d x 78in. length. Backless Perforated Bench Supports are 3in. o.d. steel tubing: surface mount, embedded or freestanding....
-
2013 & 2016 CBC Answer
Measurement Y1 through Y3 are irrelevant because the code does not require marking to define the "length" of parking per Section 11B-502.2. ...
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
Rationale for recommendation The original criteria proposed in the NPRM included vertical standing supports on both sides of the equipment that were 18 inches in length....
-
M301.2.3 Transfer Sides
• Sub-Committee Recommendation: The transfer surface shall be located to provide options to transfer from a mobility device onto both long sides (length), right and left, of the surface...
-
Standing Supports [M305.2]
Rationale The original criteria proposed in the NPRM included vertical standing supports on both sides of the equipment that were 18 inches in length....
-
1. Sloped Surfaces
The amount of slope or grade is described as the proportion of a vertical rise to a horizontal length....
-
Selection of Methodology
complete survey questions within eight research sections: SECTION #1 Geographic, demographic, and political information (type of management agency, park location, trail name, age of trail, length...
-
11B-406.5.3 Landings
The landing clear length shall be 48 inches (1219 mm) minimum....
-
406.7 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position
These standing supports may be provided in a horizontal position, vertical position, or a combination of horizontal and vertical positions, as long as the minimum length of gripping surface...
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
407.12.3.2 Obstructed Forward Reach (Section-by-Section Analysis)
An obstructed forward reach, for purposes of this section, occurs when the operable part is located behind the leading edge of the maximum protrusion within the length of the vertical reference...
-
7.4.11.2 Sign Contents
are provided at trailheads on newly constructed or altered trails, regardless of whether the trail is accessible, the signs shall include at minimum the following information: Length...
-
3.3 Need for "Overriding" Principle
The concept and the research project through which we arrived at our performance recommendations will be expanded upon at length in the last section of this paper....
