The surface of the transfer system shall not be sharp and shall have rounded edges....
Search Results "Edge Protection"
-
11B-1009.5.5 Surface
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
Plumbing protection. Water supply and drain pipes under lavatories shall be insulated or otherwise covered to protect against contact....
-
Delta Toilet with FlushIQ Technology
Delta® toilets with FlushIQ™ Technology are smart toilets that feature the latest technologies from Delta Faucet: a touch-free flush, overflow protection and leak detection....
-
405 Ramps
Technical provisions address running slope, cross slope, handrails, landings, edge protection, and other elements....
-
FIGURE INDEX
Maneuvering Clearances at Recessed Doors and Gates Figure 404.2.6 Doors in Series and Gates in Series Figure 405.7 Ramp Landings Figure 405.9.1 Extended Floor or Ground Surface Edge...
-
C. Patterns Of Discrimination
Whenever the Office for Civil Rights finds that in light of the representation of protected groups in the relevant labor market there is a significant underrepresentation or overrepresentation...
-
§ 38.159(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, measured on level ground, for a maximum rise of 3 inches (75 mm), and the transition from roadway...
-
Transfer Sides (M301.2.3 and M302.2.3)
Otherwise, no part of the equipment can project beyond the edge of the transfer sides and obstruct access to the transfer surface....
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
"Alerting to intruders." (Section-by-Section Analysis)
Some commenters argued that the phrase "alerting to intruders" in the current text has been misinterpreted by some people to apply to a special line of protection dogs that are trained to...
-
Horizontal Exits [IBC §1021 (2003), §1005.3.5 (2000)]
A horizontal exit compartmentalizes a building allowing occupants to exit the area containing the origin of a fire into another portion of the building that is protected by fire-resistance-rated...
-
Guest Bathrooms
Permanent seats at the head end of the bathtub shall be 15 inches (380 mm) deep minimum and shall extend from the back wall to or beyond the outer edge of the bathtub. 610.3 Shower...
-
8.6 Persons "Regarded As" Addicts and Illegal Drug Users
Regarded As" Addicts and Illegal Drug Users Individuals who are not illegally using drugs, but who are erroneously perceived as being addicts and as currently using drugs illegally, are protected...
-
Back Support: ADA Standard Section 903.4
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
11B-705.1.2.3 Islands or cut-through medians
cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches (51 mm) maximum on each side, placed at the edges...
-
11B-705.1.2.3 Islands or cut-through medians
cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches (51 mm) maximum on each side, placed at the edges...
-
Haws Barrier-Free Chilled Dual Wall Mount Fountain H1011.8HO
Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals. 18 gauge...
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....
-
§ 38.83(b)(7) Platform gaps
When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch...
-
1117B.1, Item 5
The bubbler outlet orifice shall be located within 6 inches (152mm) of the front edge of the drinking fountain and within 36 inches (914 mm) of the floor....
-
1117B.1, Item 4
The bubbler outlet orifice shall be located within 6 inches (152mm) of the front edge of the drinking fountain and within 36 inches (914 mm) of the floor....
-
AJW Architectural Products US888 Single Security Toilet Tissue Dispenser, Exposed Mounting - Surface Mounted - Non-Controlled
Theft Unit is designed for security applications Product Specs Body: Fabricated of #18 ga. stainless steel, one piece construction with a #4 satin finish with a removable vinyl protective...
-
BEA Inc. Jamb Style Door Access PTE (Push To Exit)
rusting Stainless steel materials are 100% recyclable and environmentally friendly Available in hard wired and wireless options (433, 390 or 300 MHz) Beveled edges...
