C101.4 Units of Measurement (Section-by-Section Analysis) This proposed section, which also has a counterpart in the proposed 508 Standards (E101.4), provides that measurements are stated...
Search Results "Mitigating Measures"
Filters
Commonly Searched Documents
-
C101.4 Units of Measurement (Section-by-Section Analysis)
-
M101.7 Units of Measurement (Section-by-Section Analysis)
In the MDE NPRM there was no explanation of the units of measurement used throughout the rule text....
-
Measuring Techniques
Measuring Techniques The Body Size Descriptors These measurements serve as basic population descriptors and are applied in the design of workspaces and the physical environment, as...
-
Compilation of Instruments and Measurement Methods for Surface Accessibility
Compilation of Instruments and Measurement Methods for Surface Accessibility During the course of this project the following information was developed as background information to assist...
-
ADA Technical Assistance Manual Addendum (10/29/02)
measure....
-
§ 36.105 Definition of ‘‘disability.’’
(viii) The determination of whether an impairment substantially limits a major life activity shall be made without regard to the ameliorative effects of mitigating measures....
-
3. Measuring Door Openings
Measuring Door Openings Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
Areas for further work
Design issues: Existing industry tolerances Units of measure Measurement instruments Accuracy of instruments/measurement uncertainty Use of significant...
-
Suggestions by Jean Tessmer
a digital inclinometer mounted to measure 1 - foot increments....
-
1.1.8 Alternate measurement tools
1.1.8 Alternate measurement tools....
-
I. Required Survey Tools
The following tools will be required to allow you to accurately complete the ADA Checklist for New Lodging Facilities: A. 12' Stiff Metal Tape Measure B. 24" Long Builders' Level (Square...
-
Unified Facilities Guide Specifications
The straightedge is to be held in contact with the surface and moved ahead one - half of the length of the straightedge for each successive measurement....
-
Take Good Measurements
Take Good Measurements When in doubt write it down. It’s better to have too much information than not enough. ...
-
1.1.16 Alternate measurement tools
1.1.16 Alternate measurement tools....
-
General: ADA Standard Section 502.1
Section 502.1 of the ADA Standards covers information in the current ADA Standards for accessible parking spaces.
-
11B-502.1 General
Where parking spaces are marked with lines, width measurements of parking spaces and access aisles shall be made from the centerline of the markings....
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
The 3-D measurements required the measurement of reference points and planes, as well as the measurement of key body and WhMD points with respect to the environment....
-
Initial Measures and Transfer Setup
Wheelchair measurements were completed without the person seated in their wheelchair. ...
-
Sloped Surfaces
Two slope measurements perpendicular to one another should be taken at each location....
-
Construction Specification Institute
Construction Specification Institute While developing suggested tolerances for surface materials, the Construction Specifications Institute developed a suggested method for measuring ramp...
-
§ 35.108 Definition of ‘‘disability.’’
(viii) The determination of whether an impairment substantially limits a major life activity shall be made without regard to the ameliorative effects of mitigating measures....
-
2. Electronic (Digital) Level
Make sure there are no pebbles or other debris under your level when you measure slopes and cross slopes....
-
Taking Measurements
[See subsections ...]
-
How to Measure Access Aisles
In the final rule, the Board has clarified how parking spaces and access aisles are to be measured....