Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
Search Results "Bus Lift"
Filters
Commonly Searched Documents
-
Dimensions: ADA Standard Section 810.2.2
-
Bus Stop Pads
Specifications in 810.2 for bus stops applied to "bus stop pads" in the proposed rule....
-
Operable Parts: ADA Standard Section 410.5
Section 410.5 covers the current ADA Standards for operable parts of the platform lift controls.
-
11B-209.2.3 On-street bus stops
On-street bus stops shall comply with Section 11B-810.2 to the maximum extent practicable....
-
§ 38.159(b)(2)(ii) Exception
Where the lift is designed to deploy with its long dimension parallel to the vehicle axis and which pivots into or out of the vehicle while occupied (i.e., “rotary lift”), the requirements...
-
§ 37.131(a)(1) Bus
(1) Bus....
-
11B-810.2.3 Connection
Bus stop boarding and alighting areas shall be connected to streets, sidewalks, or pedestrian paths by an accessible route complying with Section 11B-402....
-
810.2 Bus Boarding and Alighting Areas
810.2 Bus Boarding and Alighting Areas. Bus boarding and alighting areas shall comply with 810.2. Advisory 810.2 Bus Boarding and Alighting Areas....
-
810.2 Bus Boarding and Alighting Areas
Bus boarding and alighting areas shall comply with 810.2. Advisory 810.2 Bus Boarding and Alighting Areas....
-
810.2 Bus Boarding and Alighting Areas
Bus boarding and alighting areas shall comply with 810.2. Advisory 810.2 Bus Boarding and Alighting Areas....
-
Platform Lifts: ADA Standard Section 410
Section 410 covers the current ADA Standards for platform lifts.
-
T202 Accessible Means of Boarding and Alighting
Provision of accessible boarding and alighting may be accomplished through the use of ramps and bridgeplates, lifts, or level boarding and alighting systems that meet the technical requirements...
-
11B-810.2 Bus boarding and alighting areas
Bus boarding and alighting areas shall comply with Section 11B-810.2. [2010 ADAS] Advisory 810.2 Bus Boarding and Alighting Areas. ...
-
11B-810.2 Bus boarding and alighting areas
Bus boarding and alighting areas shall comply with Section 11B-810.2. [2010 ADAS] Advisory 810.2 Bus Boarding and Alighting Areas....
-
11B-810.2 Bus boarding and alighting areas
Bus boarding and alighting areas shall comply with Section 11B-810.2. Advisory 11B-810.2 Bus boarding and alighting areas....
-
Slope: ADA Standard Section 810.2.4
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....
-
T502.2.1 Over-the-Road Buses
For over-the-road buses, the vertical clearance at doorways shall be 65 inches (1650 mm) minimum.
-
T402.2 Design Load
Ramps and bridgeplates 30 inches (760 mm) or more in length shall be designed to support a load of 600 pounds (273 kg) minimum, placed at the centroid of the ramp distributed over an...
-
§ 38.159(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
11B-410 Platform lifts
[See subsections ...]
-
209.2.2 Bus Loading Zones
209.2.2 Bus Loading Zones....
-
§ 38.159(b)(3) Emergency operation
The lift shall incorporate an emergency method of deploying, lowering to ground level with a lift occupant, and raising and stowing the empty lift if the power to the lift fails....
-
F209.2.2 Bus Loading Zones
In bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply...