Transfer supports are required on transfer platforms and transfer steps to assist children when transferring....
Search Results "State Requirement"
-
11B-1008.3.2.3 Transfer supports
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
11B-703.7.2.6.2 Women’s toilet and bathing facilities
Exception: Within secure perimeter of detention and correctional facilities, geometric symbols shall not be required to be ¼ inch (6.4 mm) thick....
-
Text Telephones (TTY)
Section 4.1.3(17) of the 1991 Standards requires a public TTY to be provided if there are four or more public pay telephones at a site and at least one is in an interior location....
-
III. Results of the Study
Figure N illustrates the location of participating trails in twenty‐two states and the District of Columbia. Figure N....
-
TownSteel XCE9010 Cylindrical Lockdown Rigid Trim Keypad Cylindrical
CODE COMPLIANCE ANSI/BHMA A156.2: A156.2-2011 Grade 1 certified ANSI/BHMA A156.25: Meets or exceeds all applicable requirements UL/ULC: UL 10C 3-hour rated BAA: Meets guidelines of the...
-
Ampetronic ILD100 Small Area, VOX Switching Audio Induction Loop Driver Hearing System
124 x 44mm 2 microphone inputs (electret) 1 line input – twin phono (RCA) connectors for TV / hi-fi connection Input adaptors and accessories for any audio input requirements...
-
TownSteel XCE9030 Cylindrical Lockdown Rigid Trim Security Cylinder Cylindrical Keypad
CODE COMPLIANCE ANSI/BHMA A156.2: A156.2-2011 Grade 1 certified ANSI/BHMA A156.25: Meets or exceeds all applicable requirements UL/ULC: UL 10C 3-hour rated BAA: Meets guidelines of the...
-
TownSteel XCE9020 Cylindrial Lockdown Clutched Trim Cylindrical Keypad
CODE COMPLIANCE ANSI/BHMA A156.2: A156.2-2011 certified ANSI/BHMA A156.25: Meets or exceeds all applicable requirements UL/ULC: UL 10C 3-hour rated BAA: Meets guidelines of the Buy American...
-
Stanley QED 100 Series Grade 1 Extra Heavy Duty Exit Devices
duty QED100 series exit devices are designed for institutional, commercial uses such as educational, health care and industrial facilities where a long-lasting, highly durable product is required...
-
Obstructions
Obstructions “Obstructions” are also prohibited by TAS 604.3.2 within the required water closet clearance....
-
704.6 Structural stability
The wall shall extend to the height required by Section 704.11 and shall have sufficient structural stability such that it will remain in place for the duration of time indicated by the...
-
Scoping [4.1.2(4), 4.1.3(3)]
Requirements in 4.5 apply to accessible routes and spaces, including ramps, elevators, platform lifts, and clear floor space....
-
§ 35.151(b)(2)
(2) The path of travel requirements of § 35.151(b)(4) shall apply only to alterations undertaken solely for purposes other than to meet the program accessibility requirements of § 35.150...
-
11B-407.2.3.2 Reserved
ETA Editor's Note Imposing additional requirements regarding characters and colors, the preceding CBC requirements pertaining to elevator hoistway signs are more stringent than...
-
2. Accessible lavatories
They said that accessible lavatories should be required in all aircraft, including the much more common single-aisle aircraft....
-
Does an employer have to provide a needed reasonable accommodation?
Once an employer determines that an accommodation is reasonable, it is required to provide it, unless the employer can demonstrate that the requested accommodation would impose an undue...
-
M303.2.2 Width (Section-by-Section Analysis)
The MDE NPRM proposed to require that diagnostic equipment used by patients seated in a wheelchair provide a wheelchair space that was at least 36 inches wide....
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
Counter surfaces shall not be considered shelf space nor used to satisfy the requirements of 804.5....
-
224.1.1 Alterations
Where guest rooms are altered or added, the requirements of 224 shall apply only to the guest rooms being altered or added until the number of guest rooms complies with the minimum number...
-
203.9 Employee Work Areas
Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so that individuals with disabilities...
-
Technical Memorandum TM 2012-03 Shopping Centers or Shopping Malls
This accessible route is required regardless of whether or not there is at least one sales or service establishment on the mezzanine level....
-
11B-604 Water closets and toilet compartments
routes, clear floor space and clearances required at other fixtures, and the turning space....
