Whereas the rationale for seat height in ADAAG is to provide a surface that is at or slightly below the wheelchair seat in order to accommodate a sliding transfer, the rationale in eldercare...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
4.16.3 Height
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-705.1.2.3 Islands or cut-through medians
cut-through less 2 inches (51 mm) maximum on each side, placed at the edges of the pedestrian island or cut-through median, and shall be separated by 24 inches (610 mm) minimum of walking surface...
-
11B-809.10.5.1 Clear floor space
The edge of the clear floor space shall be flush with the control wall surface....
-
11B-812.7.2 Marking
The color of the borderlines, hatched lines, and letters shall contrast with that of the surface of the access aisle....
-
502.5 Vertical Clearance
If compliance with this minimum height clearance requirement will cause the structure to exceed local height limitations imposed by local zoning, planning, or fire ordinances, or will result...
-
B. Scoping Requirements for Units with Communication Features
units provided by FEMA include the communication features required by the final rule, including combination smoke alarms and visual notification appliances complying with NFPA 72 National Fire...
-
Trash, Recycling, and Other Essential Containers
When the surface is unpaved or not built with boards, slopes not steeper than 1:33 (3 percent) are allowed if necessary for drainage....
-
Medical Device Manufacturers
Many medical device manufacturers currently incorporate accessible features in some of their products such as patient support surfaces that are height adjustable, transfer and positioning...
-
Bradley MG Terreon Waste Receptacle
Compatible with Express Lavatory Systems - MG-Series Cover is constructed of vandal-resistant Terreon or TerreonRE Solid Surface Material, available in dozens of colors...
-
Section 35.151(c) Accessibility Standards for New Construction and Alterations (Section-by-Section Analysis)
federal guidelines consistent to the extent permitted by law, and to harmonize the federal requirements with the private sector model codes that form the basis of many state and local building...
-
11B-216.8 Toilet rooms and bathing rooms
Existing buildings that have been remodeled to provide specific toilet rooms or bathing rooms for public use that comply with these building standards shall have the location of and the...
-
‘‘Facility.’’ (Preamble, Section-by-Section Analysis)
"Facility'' means all or any portion of buildings, structures, sites, complexes, equipment, rolling stock or other conveyances, roads, walks, passageways, parking lots, or other real or...
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—in-swinging doors (Req. # 32)
is further understood that slightly more than 70 percent of all existing facilities assumed to have single-user toilet rooms with in-swinging doors already are covered by State or local building...
-
Facility (Section-By-Section Analysis and Response to Comments)
"Facility'' means all or any portion of buildings, structures, sites, complexes, equipment, rolling stock or other conveyances, roads, walks, passageways, parking lots, or other real or...
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—in-swinging doors (Req. # 32)
is further understood that slightly more than 70 percent of all existing facilities assumed to have single-user toilet rooms with in-swinging doors already are covered by State or local building...
-
11B-206.4.10 Medical care and long-term care facilities
The purpose of this requirement is to permit a person to exit a vehicle and enter the building under cover....
-
11B-206.4.10 Medical care and long-term care facilities
The purpose of this requirement is to permit a person to exit a vehicle and enter the building under cover....
-
Kawneer North America AA™250/425 Thermal Entrances
/2" bottom rail Door is 2-1/4" deep Door has 1/8" typical wall thickness Dual welded corner construction Single acting Offset pivots, butt hinges or continuous geared hinge Surface...
-
Mark J. Mazz, AIA: Architectural Consultant on Accessibility
I don’t design buildings anymore because I like being self-employed without employees....
-
HEWI Push/Pull Handle set to EN 179
Secure Handle on Heavy Doors Push/pull handle sets can be used on emergency exits at which a panic situation is not to be expected, because the people in the building are familiar with...
-
Schindler 330A Low Rise Borehole Hydraulic Elevator
Unsurpassed selection of design and control features Quick turnaround and expert installation Low-cost and eco-friendly holeless solution Suitable for a wide range of low-rise buildings...
-
Sargent 8200 Mortise Lock with Push/Pull Trim
So when the building requirements are tough, push back with SARGENT....
-
Lutron Sivoia QS Wireless Shading System
Sivoia QS Wireless offers precision control of shades in one room, multiple rooms, or an entire home or building all at the touch of a button....
