Where storage is provided in accessible spaces, at least one of each type shall comply with Section 11B-811. [2010 ADAS] Advisory 225.2 Storage. ...
Search Results "Loss of Productive Space"
Commonly Searched Documents
-
11B-225.2 Storage
-
§ 38.93(a)(2)
(2) If doorways connecting adjoining cars in a multi-car train are provided, and if such doorway is connected by an aisle with a minimum clear width of 30 inches to one or more spaces where...
-
Portable Floor Lifts
While these lifts may be less expensive than overhead lifts, they require more maneuvering space in the room and space for storage....
-
Lighting Contrast and Conceptual Design
So [I had an old ] space. It was old design. In February of 2002, we moved into the new office of the chief architect....
-
Introduction
ADA requirements for new construction and alterations include detailed provisions for elements, spaces, and facilities....
- Bobrick TrimLineSeries™ Surface-Mounted Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-370639
- Bobrick ConturaSeries® Semi-Recessed Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-47064
- Bobrick ClassicSeries® Surface-Mounted Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-2706
- Easterseals Blake Foundation
-
T704 Announcement Systems
For stop announcement systems, signs must be provided onboard and be viewable from all wheelchair spaces and priority seats....
- Panda S.66 Solid Wood Folding Door System
-
Alterations to Existing Elevators
When a single space or element is altered, the 1991 Standards, at sections 4.1.6(1)(a) and (b), require the space or element to be made accessible....
-
Section 4.1.5, Additions (Preamble, Section-by-Section Analysis)
But additions also have attributes of new construction, and to the extent that a space or element in the addition is newly constructed each new space or element must comply with the applicable...
-
R304.5.1.2 Shared Use Paths
As proposed in the NPRM, R304.5.1 would require the clear width of curb ramp runs (excluding flared sides), blended transitions, and turning spaces to be 4 feet minimum....
-
The International Symbol of Accessibility (ISA)
The ISA continues to be recognized worldwide as a symbol identifying accessible elements and spaces....
-
Technical Memorandum TM 2012-02 Emergency Response Buildings and Facilities
All other common use areas, elements, and spaces, including, but not limited to, parking, meeting and training rooms, and conference rooms, shall comply with applicable provisions of the...
-
1. Typical Issues for Individuals Who Use Wheelchairs, Scooters, or other Mobility Devices
Typical Issues for Individuals Who Use Wheelchairs, Scooters, or other Mobility Devices An accessible route connects accessible passenger drop-off areas, accessible parking spaces, and...
-
New Construction
These chapters provide design and technical specifications for elements, spaces, buildings, and facilities....
-
Using the Polling Place Checklist
Using the Polling Place Checklist Tools and Documentation A few simple tools may be used to measure the sizes and the slope of specific elements and spaces: • A metal tape measure...
-
Technical Requirements for Accessible Hiker/Pedestrian Trails
Section 7.4 of FSTAG explains the accessibility requirements for trails, including trail surfacing, clear tread width, grade and cross slope, resting intervals, passing spaces, tread obstacles...
-
1017.1 General
The technical requirements address the surface of the trails, passing spaces, and resting intervals (1017.2); the clear tread width of trails (1017.3); passing spaces (1017.4); tread obstacles...
-
203 General Exceptions
., with racks or shelves) to be accessible. 203.9 Employee Work Areas: Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3...
-
III-1.5200 Scope of exemption
If a nonreligious entity operates a community theater or other place of public accommodation in donated space on the congregation's premises, is the nonreligious entity covered by title...
-
3.3.11 180-Degree Turn
The space requirements for a 180-degree turn are similar across countries, ranging from 1500 mm (59 in.) in the U.K. and Canada to 1540 mm (60.6 in.) in Australia....