Von Duprin 22 Series Exit Devices offer: 22 Rim Exit Device & Standard Trim 22-F Rim Fire Exit Device & Standard Trim 2227 Surface Mounted Vertical Rod Device & Trim...
Search Results "Vertical Access"
- Allegion Von Duprin 22 Series Exit Devices
-
Dispersion
This includes choice in both vertical and horizontal sections of a seating bowl and may vary by event....
- Outdoor Extreme Mobility Beach Cruiser Powered Wheelchair
- Wheelchair Accessible Fishing Boat by Campion Marine
- ABC Chicago: Small Business Accessibility with BigBell
- Pilot Rock Accessible Park Site Amenities
- SoloRider: Accessible Golf Cart Promotional Video
- SoloRider: Accessible Golf Cart Operational Video
- 309.4 Accessible Low Drinking Fountain Operation
-
608.7 Thresholds
In transfer type shower compartments, thresholds ½ inch (13 mm) high maximum shall be beveled, rounded, or vertical....
-
23.1 Q. What type of reinforcement should be used to reinforce bathroom walls for the later installation of grab bars?
that grab bar reinforcing may be accomplished in a variety of ways, such as by providing plywood panels in the areas illustrated in the Guidelines under Requirement 6, or by installing vertical...
-
608.7 Thresholds
In transfer type shower compartments, thresholds ½ inch (13 mm) high maximum shall be beveled, rounded, or vertical....
-
Extensions
The bottom extension is especially important in providing this support until one is fully vertical....
-
§ 38.53(d)(1) Requirements
Vertical alignment may be accomplished by vehicle air suspension or other suitable means of meeting the requirement....
-
11B-703.6.1 Pictogram field
The 6-inch vertical dimension applies to the field, not the symbol. The symbol may be smaller than the field....
-
§ 38.29(e)
(e) For vehicles in excess of 22 feet in length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either terminate at the lower edge of the aisle-facing...
-
11B-608.7 Thresholds
In transfer type shower compartments, thresholds ½ inch (12.7 mm) high maximum shall be beveled, rounded, or vertical....
-
810.5.3 Platform and Vehicle Floor Coordination
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Design Criteria for the Transfer Station
Seat width ranges for platform 1 and 2 Adjustable between 18” and 30” Seat depth for platform 1 and 2 Fixed at 16” Vertical...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
14. If an alteration is being made to part of a play area, does the entire play area need to be upgraded with accessible components and surfacing?
If an alteration is being made to part of a play area, does the entire play area need to be upgraded with accessible components and surfacing?...