computer while talking on phone) Identify tasks that must be performed simultaneously and tasks that can be performed individually Provide specific feedback to help employee target areas...
Search Results "Day Use Area"
-
Multi-tasking
-
11B-705.1.1.3.2
Contrast in percent shall be determined by: Contrast percent = [(B1-B2)/B1] x 100 percent where B1 = light reflectance value (LRV) of the lighter area and B2 = light reflectance...
-
11B-705.1.1.3.2
Contrast in percent shall be determined by: Contrast percent = [(B1-B2)/B1] x 100 percent where B1 = light reflectance value (LRV) of the lighter area and B2 = light reflectance...
-
Need for This Technical Assistance
developmental disability was subject to discrimination on the basis of her disability because the State did not provide her with supports and services following the removal of her two-day-old...
-
Considerations When Hiring an Interpreter
Typically, interpreters should be placed at the front of the room near the speaker in a well-lit area....
- mobileWOMEN.org
-
Site Impracticality Determinations
Several commenters presented specific examples of possible problems with the use of arrival points, as specified in the Option One guidelines....
-
ELEVATOR, PASSENGER
[DSA-AC] An elevator used primarily to carry passengers....
-
ELEVATOR, PASSENGER
[DSA-AC] An elevator used primarily to carry passengers....
- ADA25: #17 of 25 -- Recreation
-
11B-804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1524...
-
§ 36.406(f)(4)(ii)
(ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured to the top of the screen) are from the 40th to the 100th percentile of vertical viewing...
-
11B-203.14 Raised diving boards and diving platforms
accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements or areas...
-
1002 Amusement Rides
This section also addresses access at loading and unloading areas and provides criteria for wheelchair spaces, ride seats designed for transfer, and transfer devices....
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
Common Technical Requirements
For instance, if five benches are provided at a viewing area, at least 20 percent (or one) of the benches must comply with the technical requirements for benches....
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
§ 36.406(f)(4)(ii)
(ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured to the top of the screen) are from the 40th to the 100th percentile of vertical viewing...
-
§ 35.151(g)(4)(ii)
(ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured to the top of the screen) are from the 40th to the 100th percentile of vertical viewing...
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
F247.4 Trail Facilities
Outdoor recreation access routes are not required at camping facilities, picnic facilities, or viewing areas provided on trails....
-
230 Two-Way Communication Systems
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with 708....
-
F245.4.4 Location
This section requires outdoor recreation access routes to coincide with or be located in the same general area as general circulation paths....
-
F244.5.4 Location
This section requires outdoor recreation access routes to coincide with or be located in the same general area as general circulation paths....
