Electrical receptacles installed to serve individual appliances and not intended for regular or frequent use by building occupants are not required to be mounted within the specified reach...
Search Results "Fire-Building Surface"
-
A4.27.3 Height
-
Accessible Route
A continuous unobstructed path connecting all accessible elements and spaces of a building or facility....
-
6.1 General
In addition to the requirements of 4.1 through 4.35, medical care facilities and buildings shall comply with 6....
-
§100.201a(b)(1) ICC/ANSI A117.1-2003
(1) American National Standard: Accessible and Usable Buildings and Facilities, 2003 edition, (ICC/ANSI A117.1-2003), may be obtained from the International Code Council, 500 New Jersey...
-
§100.201a(b)(2) ICC/ANSI A117.1-1998
(2) American National Standard: Accessible and Usable Buildings and Facilities, 1998 edition, (ICC/ANSI A117.1-1998), may be obtained from the International Code Council, 500 New Jersey...
-
§100.201a(b)(3) CABO/ANSI A117.1-1992
(3) American National Standard: Accessible and Usable Buildings and Facilities, 1992 edition, (CABO/ANSI A117.1-1992), may be obtained from the International Code Council, 500 New Jersey...
-
How is “technical infeasibility” determined in an alteration?
Examples include work that would impact a facility’s structural frame or that would conflict with applicable codes or building requirements....
-
Vertical Access
modifications are necessary (§206.2.3.1) (or as needed to provide an accessible path of travel to an altered primary function area if not disproportionate to the cost (§202.4)), unless the building...
-
SECTION 1010 DOORS, GATES AND TURNSTILES
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
SECTION 1011 STAIRWAYS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
1009.7.4 Stairways
Exception: The clear width of 48 inches (1220 mm) between handrails is not required at stairways serving buildings equipped throughout with an automatic sprinkler system installed in accordance...
-
1.9.1.2 Application
accommodations, as defined, and commercial facilities, as defined, shall be accessible to persons with disabilities as follows: Exception: Certain types of privately funded multistory buildings...
-
SECTION 1011 STAIRWAYS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
SECTION 1010 DOORS, GATES AND TURNSTILES
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
-
233.3.3 Additions
Where an addition to an existing building results in an increase in the number of residential dwelling units, the requirements of 233.3.1 shall apply only to the residential dwelling units...
-
202.6 Architectural Barrier Removal
Removal of architectural barriers, pursuant to 28 C.F.R. s. 36.304, from buildings, structures or facilities shall comply with this code’s requirements for alterations unless compliance...
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
-
R406.3 Unobstructed Side Reach
approach to an element and the side reach is unobstructed, the high side reach shall be 1220 mm (4.0 ft) maximum and the low side reach shall be 380 mm (1.25 ft) minimum above the finish surface...
-
Built-up Curb Ramps [4.7.6]
(The surface of access aisles cannot slope more than 2% in any direction)....
-
4.7.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
Wheelchair Work Measurement Method
Wheelchair work per meter values for straight and turning were determined for all test course surfaces except sand, under dry conditions using the Wheelchair Work Measurement Method in accordance...
-
Fixed tactile maps
Placement on a horizontal or near horizontal surface provides the map reader with a real world orientation....
-
6.9 Tread Obstacles
Where the surface is paved or is elevated above the natural ground, obstacles shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
11B-704.5 TTY shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....