EXCEPTIONS: 1. In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
Search Results "Enhanced 9-1-1"
-
404.2.3 Doorways - Clear Width
-
3.1.4.1 Width of Non-RV Campsite Vehicle Parking Areas
Exception 1....
-
II. REMEDIAL ACTION
. §§ 35.150(b)(1) and 35.151....
-
H. MISCELLANEOUS
Per 28 CFR § 36.303(c)(1), the Cavs shall furnish appropriate auxiliary aids and services where necessary to ensure effective communication with individuals with disabilities....
-
REFERENCES
1. Boninger, M.L., et al., Investigating neck pain in wheelchair users. Am J Phys Med Rehabil, 2003. 82(3): p. 197-202. 2....
-
§100.205(d)
(d) The application of paragraph (c) of this section may be illustrated by the following examples: Example (1): A developer plans to construct a 100 unit condominium apartment building...
-
Calculation of Percentages
wheelchair accessible water closets (16” – 18” centerline from side walls or partitions), specifying to the midpoint of the range (17”) will accommodate any construction variations up to 1”...
-
[ADA Title III] Readily achievable
In determining whether an action is readily achievable factors to be considered include -- (1) The nature and cost of the action needed under this part; (2) The overall financial...
-
10 - foot straightedge method
When used as a specification or requirement, a maximum deviation in length under the straightedge is given, such as "no point shall exceed 1/4 inch under a 10 - foot straightedge."...
-
BACKGROUND
BACKGROUND 1....
-
JURISDICTION
. § 12131(1). The Department is authorized under 28 C.F.R....
-
§ 38.23(b)(13) Handrails
handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than 1/...
-
§ 38.95(b)(13) Handrails
handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than 1/...
-
§ 37.187(c)
The following examples illustrate the provisions of this paragraph (c): Example 1. Operator Y's office is staffed only during normal weekday business hours....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Where a door is provided the symbol shall be mounted within 1 inch (25 mm) of the vertical centerline of the door....
-
§ 38.125(b)(13) Handrails
handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than 1/...
-
§ 38.83(b)(13) Handrails
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than 1/...
-
11B-404.2.3 Clear width
Exceptions: 1. In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
II-3.5100 General
ILLUSTRATION 1: The director of a county recreation program prohibits persons who use wheelchairs from participating in county-sponsored scuba diving classes because he believes that persons...
-
1009.7.2 Separation
Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
-
[ADA Title III §36.104] Readily achievable
In determining whether an action is readily achievable factors to be considered include -- 1) The nature and cost of the action needed under this part; 2) The overall financial resources...
-
11B-207.1 General
International Building Code (2000 edition and 2001 Supplement) or section 1007 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)...
-
11B-233.3.1.2.6.4 Test number three, unusual characteristics test
An accessible route to a building entrance is impractical due to unusual characteristics of the site when: 1....
-
404.2.3 Clear Width
EXCEPTIONS: 1. In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....