Some examples of supports include a rope loop, a loop type handle, a slot in the edge of a flat horizontal or vertical member, poles or bars, or D rings on the corner posts....
Search Results "Vertical Access"
-
11B-1008.3.2.3 Transfer supports
-
§ 38.95(b)(7) Platform gaps
car floor height with the inner barrier down (if applicable) or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally and 5/8 inch vertically...
-
§ 38.125(b)(7) Platform gaps
car floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally and 5/8 inch vertically...
-
11B-1008.3.2.3 Transfer supports
Some examples of supports include a rope loop, a loop type handle, a slot in the edge of a flat horizontal or vertical member, poles or bars, or D rings on the corner posts. ◼...
-
11B-704.5 TTY shelf
The shelf shall be capable of accommodating a TTY and shall have 6 inches (152 mm) minimum vertical clearance above the area where the TTY is to be placed....
-
704.5 TTY Shelf
The shelf shall be capable of accommodating a TTY and shall have 6 inches (150 mm) minimum vertical clearance above the area where the TTY is to be placed....
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I"....
-
Aisle Stairs and Ramps in Assembly Areas
Sections 4.1.3 and 4.1.3(4) of the 1991 Standards require that interior and exterior stairs connecting levels that are not connected by an elevator, ramp, or other accessible means of vertical...
-
E.5. - Will agencies have a way of obtaining standardized product testing results to determine if EIT meets the Access Board’s technical provisions?
In May 2001, the agencies with lead responsibilities for the implementation of Section 508 convened an Accessibility Forum to facilitate discussion among the EIT industry, disability advocacy...
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
Reflective & Transparent Surfaces can be Dangerous Vertical Surfaces (slide 4) Two examples are shown of hazards from reflective and transparent vertical surfaces....
-
Window Ease
Window Ease™ is designed to be the versatile accessibility solution for new as well as existing facilities....
-
Haws AXION® MSR Barrier-Free Eye/Face Wash 7360BTWC
Space efficient design allows the 7360BTWC to be mounted in a number of easily accessible locations while providing a barrier-free standard....
-
Southwest Home Products Window Ease Latching System
Modifies New or Existing Windows For Vertical or Horizontal Sliding Windows Compliance with All Codes Guaranteed Window EaseTM is not a window....
-
Can a single EV charger service two EV Accessible spots or does each spot have to have its own charger?
RESPONSE: A single multiport EV charger that can simultaneously charge two vehicles can be used to serve two EV spaces required to be accessible....
-
G.1. - Are there any exceptions to the requirement to acquire EIT that meets the technical provisions of the Access Board's standards?
Agencies are not required to acquire EIT that meets the technical provisions of the Access Board's standards if the acquisition: is for a national security system (FAR 39.204(b)...
-
11B-805 Medical care and long-term care facilities
Built-in cabinets, counters and work surfaces shall be accessible, including: patient wardrobes, nurses’ stations, administrative centers, reception desks, medicine preparation areas, laboratory...
-
DOT: Traveling with Service Animals with Closed Captioning
A helpful video for individuals with disabilities who are traveling with a service animal to, from, or within the United States.
-
NYC Board of Elections: Video 5 - Verifying Voting Equipment Setup
-
D.2. - Must requiring officials consider all the Access Board’s technical provisions and functional performance criteria each time they purchase EIT?
Requiring officials need only consider all applicable technical provisions from the Access Board’s standards to ensure acquired products provide comparable access (see section B.2.ii, above...
-
407.8 Reach Height and Depth
At least one of each type of operable part of stationary ICT shall be at a height conforming to 407.8.2 or 407.8.3 according to its position established by the vertical reference plane specified...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
704.5 TTY Shelf
The shelf shall be capable of accommodating a TTY and shall have 6 inches (150 mm) minimum vertical clearance above the area where the TTY is to be placed....
-
18. Where an existing ground level play component is replaced, should the new component comply with the technical provisions of Section 1008.4 even if there is not an accessible route to it?
Unless the required number of accessible ground level play components are provided, the new play component would be required to be accessible....
-
Wireless RERC: Accessibility, Usability, and the Design of Wearables and Wirelessly Connected Devices
As augmentative tools for work and living enhancement, and social participation, these technologies should be not only usable, but also be accessible and inclusive for people with disabilities...
