provided along a trail, at least 20 percent, but no less than one, of each type of element provided at each location on the trail (other than within camping and picnic facilities and viewing areas...
Search Results "Raised Work Area"
Commonly Searched Documents
-
Outdoor Constructed Features Along Trails [F247.5]
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
c-ii
Yes    No If Yes, and the elevator or lift is part of the accessible route to a shelter area, is back-up electrical power available to operate the elevator or lift for the duration...
-
12101(a)(3)
(3) discrimination against individuals with disabilities persists in such critical areas as employment, housing, public accommodations, education, transportation, communication, recreation...
-
Pit Toilet
A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use. ...
-
Recreation and Heritage Resources Integrated Business Systems
This recreation resources management system identifies customer standards that the Forest Service expects to provide across all recreation and heritage resources program areas....
-
Pit Toilet
A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use....
-
4.4.3 Backrest and Armrest
When more than one bench is provided in the same area, at least 50 percent of the benches shall have a backrest running the full length of the bench....
-
4.4.1 General
Section 4.3.1 does not apply to built-in benches provided in assembly areas such as amphitheaters. These benches are covered by sections F221.2.1.1, F221.2.2, and 903 of the ABAAS....
-
Rotational Penetrometer
The instrument used in field-testing to test for compliance with the Outdoor Developed Areas Guidelines firmness and stability recommendations....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of 1/2 inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Pit Toilet
A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use. ...
-
Places of Public Accommodation and Commercial Facilities
listed in the statute, including stores and shops, restaurants and bars, sales or rental establishments, service establishments, theaters, places of lodging, recreation facilities, assembly areas...
-
Transfer Surface (M301.2 and M302.2)
Depending on the configuration of the equipment, the transfer surface may coincide with the seat area of an examination chair, or occupy only a portion of an examination table or imaging...
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
-
11B-221.2.1.5 Stadium-style movie theaters
cross-aisles in the stadium section that satisfy at least one of the following criteria: Located within the rear 60 percent of the seats provided in the theater; or Located within the area...
- Proline Drain: Quick Drain USA - Barrier-Free Tub to Shower Conversion
- The Accessibility Management Platform (AMP)
- Youth Action Council on Transition (YouthACT)
- AER-DECâ„¢ Product Video
-
5.8.2.7 Base Support Allowance Recommendation
Industry worked with Committee members to optimize the accessibility of the base support configuration, shown in Figure 5.8.2.7(a) above....
-
904 Sales and Service Counters
Under this requirement, the height of check-writing surfaces, where provided, is to comply with the height of work surfaces addressed in section 902.3 (34 inches maximum), consistent with...
-
Providing Auxiliary Aids and Services
Find out which services are available in the local area, where to obtain them, and how long it takes to arrange for them....
-
Surfaces (R302.7) (Section-by-Section Analysis)
Vertical alignment of surfaces within pedestrian access routes (including curb ramp runs, blended transitions, turning spaces, and gutter areas within pedestrian access routes) and within...