Where provided, key surfaces not on active areas of display screens, shall be raised above surrounding surfaces....
Search Results "Patient Change Area"
-
707.6.1 Input Controls
-
11B-211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with Section 11B-211....
-
802.1.2 Width
[ECTCR UFAS 4.33.2, Fig. 46] Figure 802.1.2 Width of Wheelchair Spaces in Assembly Areas...
-
707.6.1 Input Controls
Where provided, key surfaces not on active areas of display screens, shall be raised above surrounding surfaces....
-
9.2.2(2)
This is not intended to require an elevator in multi-story units as long as the spaces identified in 9.2.2(6) and (7) are on accessible levels and the accessible sleeping area is suitable...
-
10.3.2(1)
by the Department of Transportation in subpart C of 49 CFR part 37 and existing intercity rail stations shall provide at least one accessible route from an accessible entrance to those areas...
-
4.7.11 Islands
Any raised islands in crossings shall be cut through level with the street or have curb ramps at both sides and a level area at least 48 in (1220 mm) long between the curb ramps in the part...
-
E2-3. Interior Stairs
., protected with a cane-detectable warning or a barrier that prevents travel into the area with less than an 80-inch-high head clearance)? [ADA Stds 4.4.2] Yes _____ No _____...
-
§100.143(b)(2)
(2) Assess the extent and scope of any likely violation, by determining which areas of operation are likely to be affected by those policies and practices, such as stages of the loan application...
-
11B-203.13 Raised boxing or wrestling rings
accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders or other means of reaching the raised elements or areas...
-
11B-211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with Section 11B-211. ...
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....
-
11B-707.6.1 Input controls
Where provided, key surfaces not on active areas of display screens, shall be raised above surrounding surfaces....
-
11B-211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with Section 11B-211....
-
DEL Motorized Solutions Motorized Rolling Shades
These systems are ideal for projects with limited mounting area or smaller sized treatments. Comfort Control Systems Our Comfort Control Systems are in one word, quieter....
-
Equalizer 1000 Series Exercise Machine
When dealing with trace muscle groups the hi/lo pulley stack can be counter balanced to almost zero resistance and weight change can be done in increments of 1 pound....
-
II-8.2000 Self-evaluation
Programs and functions may have changed significantly since the section 504 self-evaluation was completed....
-
Mohawk Group Matuto Carpet Tiles
psi Residual Indentation ASTM F1914 - Passes - Average less than 8% Slip Resistance ASTM D2047 - Passes - > 0.6 Wet, 0.6 Dry Resistance to Chemicals ASTM F925 - Passes - No Change...
-
Starodub, Inc. Ultra-Light Inertial Profiler (ULIP) for Sidewalks
Guidelines also provide limits and treatments for sidewalk vertical changes (bumps). Local jurisdictions need to assess their sidewalk system relative to ADAAG....
-
8. Reservations Made by Places of Lodging
In addition, to allow the hospitality industry appropriate time to change reservation systems, the final rule gives places of lodging 18 months from the publication date, September 15, 2010...
-
Sections 505.10.2 and 505.10.3
The requirement in the 1991 Standards that handrails extend horizontally at least 12 inches beyond the width of one tread at the bottom of a stair was changed in the 2004 ADAAG by the Access...
-
B. Accessibility of Equipment and Furniture
The Department initiated a review of accessibility of equipment and furniture on July 26, 2010, with the publication of an ANPRM to consider possible changes to requirements under titles...
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
This clarification does not constitute a substantive change to the compliance requirements of TAS 804.5 nor is it applicable to compliance with the storage requirements of TAS 225.2. ...
-
Technical Memorandum TM 2012-03 Shopping Centers or Shopping Malls
Access Board and does not constitute a substantive change to the compliance requirements of TAS 206.2.3, Exception 1....
