Search Results "Transfer Support"

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.1 Transfer Surface Height Adjustability

  5.1.1 Transfer Surface Height Adjustability. The transfer surface should have an adjustable height in small virtually continuous increments....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.2 Transfer Surface High Height

  5.1.2 Transfer Surface High Height. The transfer surface should have an adjustable height range with an upper height measuring at least 25 inches....

• Research and History > Research Documents > Best Practices in the Design of Toileting and Bathing Facilities for Assisted Transfers
  4.21.3 Seat

  Seats are only required in transfer showers, which were not used in any of the designs reviewed....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  Transfer Surface Size – M302.2.2 Seated Position

  Transfer Surface Size – M302.2.2 Seated Position The issue of seat depth was discussed and decided during the full committee meetings as follows: depth of 17 inches minimum....

• Federal Documents > Technical Assistance > Accessible Play Areas - A Summary of Accessibility Guidelines for Play Areas
  8. Can an elevated crawl tube be used to connect to a play component required to be accessible? Can that crawl tube also be considered an accessible play component?

  Yes, where transfer access is provided on a composite play structure elevated play components such as a crawl tube are permitted to connect to other play components....

• Drawings and Possible Solutions > CAD/BIM Details
  Figure 1008.3.2 Transfer Steps – Drawing from the U.S. Access Board
  

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1 Transfer Surface Height Recommendations

  5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1 Transfer Surface Height

  5.1 Transfer Surface Height...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  608.5.1 Transfer Type Shower Compartments

  In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.7 Clearance

  Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum....

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.2.4 Cross Section (Section-by-Section Analysis)

  The proposed rule did not provide specific requirements for the cross section of transfer supports....

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  1009.4.3 Wall Depth and Length

  The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-1009.4.3 Wall depth and length

  The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.3 Transfer Surface Low Height

  5.1.3 Transfer Surface Low Height. No agreement on final low height...

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  1009.4.3 Wall Depth and Length

  The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M302.2.2 Sunset

  The low transfer position height, Item A of M302.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register]. [sic]...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.5 Surface Hazards

  Transfer supports and surfaces adjacent to transfer supports shall be free of sharp or abrasive components and shall have eased edges....

• State and Local Documents > Guidelines > Accessible Swimming Pools, Wading Pools and Spas - A Summary of Accessibility Guidelines for Recreation Facilities
  Spas

  Spas Spas must provide at least one accessible means of entry, which can be a pool lift, transfer wall, or transfer system. ...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.4 Cross Section

  Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.4 Transfer Surface Height Measurement

  5.1.4 Transfer Surface Height Measurement....

• Federal Documents > Standards > 2010 ADA Standards
  Swimming Pools: ADA Standard Section 242.2

  Section 242.2 covers scoping requirements in the current ADA Standards for swimming pools.

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  1009.4.3 Wall Depth and Length

  The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-1009.4.3 Wall depth and length

  The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-1009.4.3 Wall depth and length

  The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....