Floor or ground surface within required maneuvering clearances shall comply with 302. Changes in level are not permitted. EXCEPTIONS: 1....
Search Results "Ramp Surface"
Filters
Commonly Searched Documents
-
404.2.4.4 Floor or Ground Surface
-
404.2.4.4 Floor or Ground Surface
Floor or ground surface within required maneuvering clearances shall comply with 302. Changes in level are not permitted. EXCEPTIONS: 1....
-
407.4.2 Floor Surfaces
407.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
1. New Curb Ramp Construction and Alterations
New Curb Ramp Construction and Alterations 36....
-
11B-705.1.2.2 Curb ramps
Detectable warnings at curb ramps shall extend 36 inches (914 mm) in the direction of travel....
-
5.2.1.2 Transfer Surface Depth Recommendation for M301
5.2.1.2 Transfer Surface Depth Recommendation for M301 The Committee recommends a minimum transfer surface depth of 17 inches for all M301 except imaging equipment....
-
4.5.1* General
Ground and floor surfaces along accessible routes and in accessible rooms and spaces including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
4.5.1* GENERAL
Ground and floor surfaces along accessible routes and in accessible rooms and spaces, including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
FACTS APPLICABLE TO ALL CLAIMS
For example, thousands of intersections in the City have no curb ramps or an inadequate number of curb ramps....
-
11B-406.5.9 Clear space at diagonal curb ramps
The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway....
-
11B-406.5.9 Clear space at diagonal curb ramps
The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway....
-
11B-406.5.9 Clear space at diagonal curb ramps
The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway....
-
Accessible Exterior Surfaces
Accessible Exterior Surfaces This is an executive summary of the “Accessible Exterior Surfaces Technical Report” dated 24 April 1999....
-
4.8.5(1)
(1) Handrails shall be provided along both sides of ramp segments. The inside handrail on switchback or dogleg ramps shall always be continuous....
-
KICK PLATE
An abrasion-resistant plate affixed to the bottom portion of a door to prevent a trap condition and protect its surface. Advisory Definition of KICK PLATE....
-
11B-247.1.2.2 Curb ramps
Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2. ...
-
C1-5. Curb Ramp
Where an accessible route crosses a curb is a curb ramp provided? If yes, Yes _____ No _____...
-
11B-247.1.2.2 Curb ramps
Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2....
-
11B-247.1.2.2 Curb ramps
Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2....
-
§ 38.23(c)(6) Attachment
When in use for boarding or alighting, the ramp shall be firmly attached to the vehicle so that it is not subject to displacement when loading or unloading a heavy power mobility aid and...
-
505.10.1 Top and Bottom Extension at Ramps
505.10.1 Top and Bottom Extension at Ramps. Ramp handrails shall extend horizontally above the landing for 12 inches (305 mm) minimum beyond the top and bottom of ramp runs....
-
4.10.10 Floor Surfaces
Floor surfaces shall comply with 4.5....
-
4.10.10 FLOOR SURFACES
Floor surfaces shall comply with 4.5....