The cooking surface shall be at least 15 inches (380 mm) and no more than 34 inches (865 mm) above the floor or ground surface. ...
Search Results "Firm Surface"
Commonly Searched Documents
- 
    
  
  4.2.2 Cooking Surface Height
  
 - 
    
  
  809.2.1.2 Floor Surfaces
  
809.2.1.2 Floor Surfaces This section specifies that carpet not be provided on floor surfaces in emergency transportable housing units with mobility features....
 - 
    
  
  11B-306.3.3 Minimum required depth
  
At dining and work surfaces required to be accessible by Section 11B-226.1, knee clearance shall extend 19 inches (483 mm) deep minimum at 27 inches (686 mm) above the finish floor or ground...
 - 
    
  
  Moisture and Durability
  
these surfacing systems....
 - 
    
  
  Exposed Pipes and Surfaces [4.19.4]
  
Exposed Pipes and Surfaces [4.19.4] To prevent burns, hot water pipes and drain pipes under lavatories must be insulated or otherwise configured to protect against contact....
 - 
    
  
  III. Results of the Study
  
Table 10 shows the surface materials recommended by region and surface composition....
 - 
    
  
  606.5 Exposed Pipes and Surfaces
  
606.5 Exposed Pipes and Surfaces. Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact....
 - 
    
  
  804.3 Kitchen Work Surface
  
804.3 Kitchen Work Surface....
 - 
    
  
  408.4.2 Floor Surfaces
  
408.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
 - Aluminum Swaged SG Series Pressure-Locked Grating
 - Unity Surfacing Systems Soft-Land Rubberized Safety Surfacing
 - Aluminum Dove Tail Series Pressure-Locked Grating
 - 
    
  
  6. Minimum (Low) Height Standard for Transfer Surfaces
  
Minimum (Low) Height Standard for Transfer Surfaces As indicated in Section 5.1.1, the MDE Advisory Committee recommends that equipment with transfer surfaces be height adjustable in...
 - 
    
  
  Clear Floor or Ground Space: ADA Standard Section 902.2
  
A clear floor space complying with 305 positioned for a forward approach shall be provided. Knee and toe clearance complying with 306 shall be provided.
 - 
    
  
  11B-902.2 Clear floor or ground space
  
A clear floor space complying with Section 11B-305 positioned for a forward approach shall be provided. Knee and toe clearance complying with Section 11B-306 shall be provided.
 - 
    
  
  Stability
  
The degree to which a surface resists change from contaminants or applied force, so that when the contaminant or force is removed, the surface returns to its original condition (U.S....
 - 
    
  
  Section 4.26.4
  
• Section 4.26.4 of the 1991 Standards requires handrail gripping surfaces to have edges with a minimum radius of 1/8 inch....
 - 
    
  
  403.6 Handrails
  
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with 505. Advisory 403.6 Handrails....
 - 
    
  
  403.6 Handrails
  
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with 505. Advisory 403.6 Handrails....
 - 
    
  
  503.4 Floor and Ground Surfaces
  
503.4 Floor and Ground Surfaces. Vehicle pull-up spaces and access aisles serving them shall comply with 302....
 - Tile Tech Pavers® Stamp-Tech™ Series Pavers
 - 
    
  
  403.6 Handrails
  
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with 505. Advisory 403.6 Handrails....
 - 
    
  
  11B-403.6 Handrails
  
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with Section 11B-505. [2010 ADAS] Advisory 403.6 Handrails. ...
 - 
    
  
  11B-403.6 Handrails
  
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with Section 11B-505. [2010 ADAS] Advisory 403.6 Handrails....