A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
Search Results "Curb Ramp Slope"
Filters
Commonly Searched Documents
-
405.9.2 Curb or Barrier
-
2.4 Slope
The running slope (grade) and cross slope of ORARs shall comply with section 2.4. ...
-
Allowances for Typical Roadway Geometry
Allowances for Typical Roadway Geometry The 1991 ADAAG and 2004 ADA and ABA Accessibility Guidelines specify a maximum running slope of 5 percent and maximum cross slope of 2 percent...
-
Handi-Ramp Galvanized Steel Ramps
Our ADA compliant Galvanized Steel Ramp Systems are designed for permanent or semi-permanent ramp situations....
-
Tread Surface: ADA Standard Section 504.4
Section 504.4 covers the current ADA Standards for the tread surfaces on stairways.
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
4.7.3 Slope
The slope of the clear floor or ground spaces required by section 4.0 shall not exceed 1:48 (2 percent) in any direction. Exception....
-
3.2.4 Slope
The ground surface in all camp living areas shall have a slope of no more than 1:48 (2 percent) in any direction. Exception....
-
Rise: ADA Standard Section 405.6
Section 405.6 covers the current ADA Standards for the rise requirements of ramps.
-
11B-405.6 Rise
The rise for any ramp run shall be 30 inches (762 mm) maximum....
-
11B-405.7.2 Width
The landing clear width shall be at least as wide as the widest ramp run leading to the landing....
-
Sloped Entries
Sloped Entries Sloped entries must comply with ADAAG accessible route provisions (36 inch minimum width, maximum 1:12 or 8.33% slope), except that the surface does not need to be slip...
-
B. Interior Ramps
Interior Ramps (1) Royal Street Entrance Interior Ramp - Defendants will rebuild this ramp so that it meets 2010 Standards §§ 206.2.4 and 405....
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
RAMP
RAMP. A walking surface that has a running slope steeper than one unit vertical in 20 units horizontal (5-percent slope)....
-
1016.7 Slopes
The slopes of outdoor recreation access routes shall comply with 1016.7....
-
1016.7 Slopes
The slopes of outdoor recreation access routes shall comply with 1016.7....
-
Cross Slope
Cross Slope. The slope that is perpendicular to the direction of travel (see running slope)....
-
Running Slope
Running Slope. The slope that is parallel to the direction of travel (see cross slope)....
-
RUNNING SLOPE
RUNNING SLOPE. The slope that is parallel to the direction of travel. (As differentiated from the definition of “Cross Slope”.)...
-
C. Parking Slope
Do the parking spaces and access aisles have surface slopes less than 1:50 (i.e.: when measured as shown on the Tools & Techniques page , is the critical dimension 1/2" or less)?...
