Tent pads and tent platforms are defined spaces with prepared surfaces for setting up and securing tents....
Search Results "Line Spacing (VMS)"
-
1013.1 General
-
F245.4.2 Routes to and within Common Use and Public Use Areas
connect each picnic unit with mobility features with common use and public use areas serving the unit; and at least one outdoor recreation access route to connect accessible elements, spaces...
-
4.10.9 FLOOR PLAN OF ELEVATOR CARS
The floor area of elevator cars shall provide space for wheelchair users to enter the car, maneuver within reach of controls, and exit from the car....
-
Maneuvering Clearances [§404.2.4]
Maneuvering Clearances [§404.2.4] Required maneuvering clearances provide space for opening and proceeding through doors, doorways, and gates using wheelchairs and other mobility aids...
-
Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments)
- Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments) Sections 4.2 through 4.35 contain the technical specifications for elements and spaces required to be...
-
11B-230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
-
§ 38.53(a)(2)
(2) If doorways connecting adjoining cars in a multi-car train are provided, and if such doorway is connected by an aisle with a minimum clear width of 30 inches to one or more spaces where...
-
§ 38.73(a)(2)
(2) If doorways connecting adjoining cars in a multi-car train are provided, and if such doorway is connected by an aisle with a minimum clear width of 30 inches to one or more spaces where...
-
1132A.1 Primary entry doors and required exit doors
The requirements of Sections 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces (e.g., entry or exit doors which open from the covered...
-
11B-230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
-
1132A.1 Primary entry doors and required exit doors
The requirements of Sections 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces (e.g., entry or exit doors which open from the covered...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
Technically Infeasible
altering a load-bearing member that is an essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces...
-
Kompan, Inc. M141 - Spring Seesaw
Product number: M141 Category: Seesaws and Teeter-Totters Product line: MOMENTS Age group: 2-5 Years...
-
Kompan, Inc. M590 - Mermaid's Fountain
Product number: M590 Category: Sandboxes and Water play Product line: MOMENTS Age group: 2-5 Years...
-
Ultratec Miniprint 425 TTY
for simplified relay calling** Sticky key feature (for single-handed typing) Built-in ring flasher Tone or pulse dial Direct connect (with 2 jacks) to standard analog telephone line...
-
Symmons Temptrol II (BP Series) Shower System BP-56-500-B30-V
limit handle turn Clear-Flo shower head with arm and flange Lever diverter with integral volume control Wall/hand shower with 5' flexible metal hose In-line...
-
American Standard Colony Soft Deck-Mount Tub Filler
This tub filler trim's clean, soft lines complement casual bathrooms....
-
CRL-Blumcraft® Panic Handles 08 7100
Available in Polished and Brushed Stainless, Satin and Polished Brass, and Oil Rubbed Bronze, Custom Finishes and Sizes Available By Special Order CRL-Blumcraft® manufactures a complete line...
-
Background
Evan Terry Associates has developed a detailed (line-by-line) reverse sortable analysis to show how the 2010 ADA Standards compare to the 1991 ADA Standards....
-
Background
Evan Terry Associates has developed a detailed (line-by-line) reverse sortable analysis to show how the 2010 ADA Standards compare to the 1991 ADA Standards....
-
Technical Memorandum TM 2013-20 Valet Parking
The 1994 TAS (and 1991 ADAAG) required valet parking facilities to provide a passenger loading zone but exempted the facilities from providing accessible passenger and van parking spaces...
-
Ground Surfaces
Section 1008.2.6 of the 2010 Standards provides technical requirements for accessible ground surfaces for play areas on accessible routes, clear floor or ground spaces, and turning spaces...
-
Grab Bar Cross Sections
For consistency with specifications for handrails, the Board has revised requirements for size (609.2) and spacing (609.3)....
