Where it is not operationally or structurally practicable to meet the horizontal or vertical requirements of paragraphs (d) (1), (2) or (3) of this section, platform or vehicle devices complying...
Search Results "Vertical Access"
-
§ 38.73(d)(4) Exception
-
11B.707.7.1.3 Horizontally mounted display screen
Where display screens are mounted tipped away from the viewer 60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices shall be...
-
11B-221.6 Semi-ambulant seats
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: Assembly areas. ...
-
11B-221.6 Semi-ambulant seats
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: Assembly areas. ...
-
11B-221.6 Semi-ambulant seats
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: Assembly areas. ...
-
1.1 Q. Are townhouses in non-elevator buildings which have individual exterior entrances required to be accessible?
If they are multistory townhouses, accessibility is not required....
-
Q23. Can individuals with disabilities be refused access to a facility based solely on the breed of their service animal?
Can individuals with disabilities be refused access to a facility based solely on the breed of their service animal? A. No. ...
-
Gangway Slope and Rise Exceptions
For example, where the vertical distance between where the gangway departs the landside connection and the elevation of the pier surface at the lowest water level is 4 feet, the gangway...
- Access II Independent Living Center, Inc. - Gallatin, MO
-
H.6 - Do Federal agency software or web development tools have to meet the Access Board's standards?
Software applications, such as web development tools, are considered EIT and therefore covered by the Access Board's standards, unless an exception applies....
-
505.4 Height
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces....
-
§ 38.125(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
§ 38.95(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
§ 38.23(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
11B.707.7.1.2 Angle-mounted display screen
Where display screens are mounted tipped away from the viewer 30 degrees to less than 60 degrees from vertical, the center line of the display screen and other display devices shall be no...
- Adaptive Surfing Makes the Ocean Accessible for People Who Use Wheelchairs - Rolling On, Episode 5
-
221 Assembly Areas
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(19)(a) In places...
- Detecto 6550 Portable Wheelchair Scale Set-up
- Accessibility Solutions and Research Center (AMAC) at Georgia Institute of Technology
- Access Alaska - Fairbanks, Anchorage, Kenai, Mat-Su, AK
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
Running Slope (Grade)
This may be expressed as a ratio of vertical distance to horizontal distance or as the percentage of change in elevation. ...
-
7.4.4.4 Turning Space
Vertical alignment between the trail tread, turning space, and resting interval shall be nominally level. The trail tread, turning space, and resting interval may overlap....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...