Locations: Restrooms Stairwells Any secondary (non-office) room Common areas Type E.2 9.5"w X 9.75"h...
Search Results "Clear Floor Area"
Filters
Commonly Searched Documents
-
Takeform Fusion Signage Miscellaneous Room Identification Type E.2
-
Accessible Icon Project
Founded by Sara Hendren and Brian Glenney, the work started as a guerilla street art campaign: placing a clear-backed sticker on top of parking signs depicting the International Symbol of...
-
ADDitude Online Magazine
Founded in 1998 by Ellen Kingsley, an award-winning journalist with a unique ability to convey credible information with empathy and inspiration, ADDitude magazine has provided clear, accurate...
-
M. Turning Space
Is there an area in each public restroom in which a person who uses a wheelchair can turn around - either a 60" diameter circle or a "T"-shaped turn area as shown in Figure 3 below?...
-
§ 36.406(f)(2)
(2) In assembly areas that are required to horizontally disperse wheelchair spaces and companion seats by section 221.2.3.1 of the 2010 Standards and that have seating encircling, in whole...
-
10.3.3(1)
(1) For the purpose of complying with 4.1.6(2) Alterations to an Area Containing a Primary Function, an area of primary function shall be as defined by applicable provisions of 49 C.F.R....
-
Re: 405 Ramps
Gentlemen/Ladies: While the code requires a 60"x 60" clear landing, does it have to be square? Please see attached and advise, thank you....
-
Armor-Tile Tactile Systems Detectable Directional System
The typical areas of use for the detectable directional are university campuses, parks, sidewalks, and transit facilities....
-
COMMON USE
Employees, tenants or staff and their guests may jointly utilize common use areas where the public is not permitted general access....
-
F206.3 Location
Accessible routes shall coincide with or be located in the same area as general circulation paths....
-
A. Accessible Entrance
Is there a sidewalk connecting the parking area and any drop off area to the walkway leading to the building? [ADA Standards § 4.1.3(1)] Yes No A2....
-
232.2 General Holding Cells and General Housing Cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
1. Side grab bar
Side grab bar: There is a grab bar on the adjacent side wall that is at least 40 inches long and from 33 to 36 inches above the floor....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
708.4 Residential Dwelling Unit Communication Systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with 708.4....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
5.1.4 Transfer Surface Height Measurement
The transfer surface height should be measured from the floor to the highest point on the seat in an uncompressed state, inclusive of bolsters....
-
T304.2 Height
Operable parts shall be located 24 inches (610 mm) minimum and 48 inches (1220 mm) maximum above the floor of non-rail vehicles....
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
