Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
Search Results "Vertical Access"
-
903.6 Structural Strength
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers....
-
Mark J. Mazz, AIA: Architectural Consultant on Accessibility
And what I find that I do best is defining what is required for accessibility, particularly with the ADA or the Fair Housing Act, or even the Architectural Barriers Act....
-
What types of physical barriers to access is a public accommodation required to remove? Why is this important to persons with HIV or AIDS?
What types of physical barriers to access is a public accommodation required to remove? Why is this important to persons with HIV or AIDS?...
-
Wheelchair accessible seating is required. At least one percent of the seating must be wheelchair seating locations.
• Wheelchair accessible seating is required. At least one percent of the seating must be wheelchair seating locations....
-
A.6 - Does Section 508, as implemented by the Access Board’s standards and the FAR, impose the same obligations on agencies and contractors?
Agencies are responsible for complying with Section 508 as a whole, including identification of applicable Access Board technical provisions (see sections C and D below) and making nonavailability...
-
Access to Independence of Cortland County, Inc. (ATI) - Cortland, NY
Mission Access to Independence empowers people with disabilities to lead independent lives in their community and strives to open doors to full participation and access for all....
-
1. Typical Issues for Individuals Who Use Wheelchairs, Scooters, or Other Mobility Devices
Typical Issues for Individuals Who Use Wheelchairs, Scooters, or Other Mobility Devices The interior accessible route connects the accessible entrance with the various service and activity...
-
Re: International Code Council (ICC): Become an ICC Certified Accessibility Inspector/Plans Examiner
The link on this page directed me to the ICC Accessibility Statement and not to the information about the Certification Exam...
-
National Center on Accessible Information Technology in Education (AccessIT)
The National Center on Accessible Information Technology in Education (AccessIT) provides resources to help educational entities purchase, develop and use information technology that is...
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and 3/4 inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)...
-
609.8 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device,...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
Is My Ramp ADA Compliant?
-
Boost Your Business - Chapter 5 - Curb Ramps
Boost Your Business - Chapter 5 - Curb Ramps
-
Improved Engineered Wood Fiber (EWF) Surfaces for Accessible Playgrounds Field Performance Testing: Final Report II
Improved Engineered Wood Fiber (EWF) Surfaces for Accessible Playgrounds Field Performance Testing: Final Report II Field Performance Testing March, 2002 – January, 2003 USDA...
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
303 Changes in Level
Section 303 addresses vertical changes in level in floor or ground surfaces. No changes have been made to this section....
-
§ 1194.25(j)(1)
(1) The position of any operable control shall be determined with respect to a vertical plane, which is 48 inches in length, centered on the operable control, and at the maximum protrusion...
-
11B-609.8 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device,...
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-307.4.1 Guy braces
Where a guy support is used within either the width of a circulation path or 24 inches maximum outside of a circulation path, a vertical guy brace, sidewalk guy or similar device shall be...
-
11B-307.4.1 Guy braces
Where a guy support is used within either the width of a circulation path or 24 inches maximum outside of a circulation path, a vertical guy brace, sidewalk guy or similar device shall be...
-
505.4 Height
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces....
