Floor or ground surfaces of ramp runs shall comply with 302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
Search Results "Comply With"
-
405.4 Floor or Ground Surfaces
-
408.3.2.1 Power Operation
Swinging doors shall be power-operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
1008.2.2 Soft Contained Play Structures
EXCEPTION: Transfer systems complying with 1008.3 shall be permitted to be used as part of an accessible route....
-
206.2.14 Fishing Piers and Platforms
Accessible routes serving fishing piers and platforms shall comply with Chapter 4 except as modified by 1005.1....
-
810.5.2 Detectable Warnings
Platform boarding edges not protected by platform screens or guards shall have detectable warnings complying with 705 along the full length of the public use area of the platform....
-
809.2 Accessible Routes
Accessible routes complying with Chapter 4 shall be provided within residential dwelling units in accordance with 809.2....
-
807.2.3 Beds
Where beds are provided, clear floor space complying with 305 shall be provided on at least one side of the bed....
-
808.4 Judges' Benches and Courtroom Stations
Judges' benches, clerks' stations, bailiffs' stations, deputy clerks' stations, court reporters' stations and litigants' and counsel stations shall comply with 902....
-
218.2 New and Altered Fixed Guideway Stations
New and altered stations in rapid rail, light rail, commuter rail, intercity rail, high speed rail, and other fixed guideway systems shall comply with 810.5 through 810.10....
-
707.2 Clear Floor or Ground Space
A clear floor or ground space complying with 305 shall be provided....
-
802.1.1 Floor or Ground Surface
The floor or ground surface of wheelchair spaces shall comply with 302. Changes in level are not permitted. EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
804.6.1 Clear Floor or Ground Space
A clear floor or ground space complying with 305 shall be provided at each kitchen appliance. Clear floor or ground spaces shall be permitted to overlap....
-
708.1 General
Two-way communication systems shall comply with 708. Advisory 708.1 General. Devices that do not require handsets are easier to use by people who have a limited reach....
-
243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with 1010....
-
206.2.17 Play Areas
Accessible routes serving play areas shall comply with Chapter 4 except as modified by 1008.2....
-
206.4.6 Residential Dwelling Unit Primary Entrance
In residential dwelling units, at least one primary entrance shall comply with 404. The primary entrance to a residential dwelling unit shall not be to a bedroom....
-
11B-1008.4.1 Turning space
At least one turning space complying with Section 11B-304 shall be provided on the same level as play components....
-
11B-234.4.2 Minimum number
characteristics of an amusement ride are altered to the extent that the amusement ride’s performance differs from that specified by the manufacturer or the original design, the amusement ride shall comply...
-
407.2.1 Call Controls
Where elevator call buttons or keypads are provided, they shall comply with 407.2.1 and 309.4. Call buttons shall be raised or flush....
-
11B-1009.3.1 Sloped entries
Sloped entries shall comply with Division 4 except as modified in Sections 11B-1009.3.1 through 11B-1009.3.3....
-
§382.83(a)
., offer seat assignments to passengers before the day of the flight), you must comply with the requirements of §382.81 of this part by any of the following methods:...
-
11B-1008.3.2 Transfer steps
Transfer steps shall comply with Section 11B-1008.3.2....
-
305.2 Floor or Ground Surfaces
Floor or ground surfaces of a clear floor or ground space shall comply with 302. Changes in level are not permitted....
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...