Several commenters felt that the required clear deck space surrounding a pool provided sufficient space for a sloped entry during alterations....
Search Results "Shower Clear Floor Space"
Commonly Searched Documents
-
Wading pools. (Section-by-Section Analysis)
-
M301.2.1, M302.2.1 Transfer Height
Transfer Height Proposed requirement: The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor...
-
Building Guidelines and Standards are needed for Accommodations of Low Vision Persons
All these things should be easily found by the person who negotiates these spaces....
- Magnuson Group DACAPO Brochure & Leaflet Holders
-
11B-405.9.1 Reserved
[2010 ADAS] 405.9.1 Extended Floor or Ground Surface. ...
-
11B-405.9.1 Reserved.
[2010 ADA Standards] 405.9.1 Extended Floor or Ground Surface....
-
Alterations: ADA Standard Section 202.3
Section 202.3 covers the most current requirements for alterations in existing building and facilities.
-
F - number system
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the construction...
-
Typical examples of reasonable modifications are:
a health club to allow a person who uses a wheelchair to bring an aide to provide assistance in getting on and off exercise equipment, in and out of a swimming pool, or to assist with showering...
-
4.20.4 Grab Bars
In fact, in instances where local building authorities required bathing fixtures with ADAAG compliant grab bar configurations, roll-in showers were installed instead due to safety concerns...
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum....
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum....
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
4.3.4 Knee and Toe Clearances
4.3.4 Knee and Toe Clearances Adequate space without an obstruction under a design element to the floor is essential for WhMD users to approach sufficiently close in a forward direction...
-
Technical Infeasibility
altering a load-bearing member that is an essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces...
-
EXTREME WEATHER
Cooling centers are air conditioned spaces such as senior centers, community centers, public libraries, and other public facilities that typically operate during daytime hours and are free...
-
7.3 Imaging System Accessibility Configuration Examples and Concerns
(or raising the room floor)....
-
Exception 9
Certain types of privately funded, multistory buildings and facilities were formerly exempt from accessibility requirements above and below the first floor under this code, but as of, April...
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised position. [2010 ADAS] 1009.2.6 Footrests and Armrests. ...
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised position. [2010 ADAS] 1009.2.6 Footrests and Armrests....
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....