(12) Controls and operating mechanisms in accessible spaces, along accessible routes, or as parts of accessible elements (for example, light switches and dispenser controls) shall comply...
Search Results "Seating Space"
Commonly Searched Documents
-
4.1.2(12)
-
Picnic Unit
An outdoor space within a picnic area or facility that is designed and constructed for picnicking and that contains one or more constructed features such as picnic tables, grills, and other...
-
11B-206.2.2 Within a site
At least one accessible route shall connect accessible buildings, accessible facilities, accessible elements and accessible spaces that are on the same site."...
-
Obstructed High Reach
Knee and toe space must extend the full depth of reach....
-
§ 37.91(a)
(a) As soon as practicable, but in no event later than July 26, 1995, each person providing intercity rail service shall provide on each train a number of spaces—...
-
11B-810.1.2 Baggage systems
Baggage check-in and retrieval systems shall be on an accessible route complying with Section 11B-402 and shall have space immediately adjacent complying with Section 11B-302....
-
1009.6.1 Travel distance
The maximum travel distance from any accessible space to an area of refuge shall not exceed the exit access travel distance permitted for the occupancy in accordance with Section 1017.1....
-
1009.6.1 Travel distance
The maximum travel distance from any accessible space to an area of refuge shall not exceed the exit access travel distance permitted for the occupancy in accordance with Section 1017.1....
-
11B-810.1.2 Baggage systems
Baggage check-in and retrieval systems shall be on an accessible route complying with Section 11B-402 and shall have space immediately adjacent complying with Section 11B-302....
-
Employee Parking Lot
Table 208.2 Parking Spaces”. ...
- Kompan, Inc. ELE400021 - Blazer Spring Toy
-
Applicability to Carrier Web Sites
The Regional Airline Association asserted that compliance costs for smaller carriers operating aircraft with 60 or fewer passenger seats would far outweigh the benefits but did not explicitly...
-
C. Availability of Captioning and Audio Description
The motion picture industry and the courts have consistently used the term “closed captioning” to refer to the provision of captions displayed on captioning devices at the patron's seat....
-
Captioning at sporting venues. (Section-by-Section Analysis)
The Department asked whether requiring captioning of safety and emergency information made over the public address system in stadiums seating fewer than 25,000 would create an undue burden...
-
Captioning at sporting venues. (Section-by-Section Analysis)
The Department asked whether requiring captioning of safety and emergency information made over the public address system in stadiums seating fewer than 25,000 would create an undue burden...
-
APPENDIX A
The first presentation addressed a number of performance and efficacy considerations for examination chairs focusing on lifting mechanisms to adjust seat height, impact of height on the...
-
6.1 Deliberative Process
., toilet seats, shower seats, dressing benches). Summary....
-
D. Regulatory Flexibility Act
Only carriers that operate at least one aircraft having a seating capacity of more than 60 passengers are required to make their Web sites accessible to passengers with disabilities and...
-
§382.57(c)(7)(i) Visibility
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
Trailhead
An outdoor space that is designated by an entity responsible for administering or maintaining a trail to serve as an access point to the trail. ...
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
R304.5.1 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 1.2 m (4.0 ft) minimum....
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
Chapter R3: Technical Requirements (Section-by-Section Analysis)
Chapter R3: Technical Requirements (Section-by-Section Analysis) Technical requirements specify what design criteria elements, spaces, and facilities must comply with in order to be considered...