[2010 ADA Standards] 607.2 Clearance. Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
Search Results "ANSI/HFES: American National Standards Institute/ Human Factors and Ergonomics Society"
Filters
Commonly Searched Documents
-
11B-607.2 Clearance
-
11B-703.4.1 Height above finish floor or ground
[2010 ADA Standards] 703.4.1 Height Above Finish Floor or Ground....
-
11B-407.3.4 Door and signal timing
[2010 ADA Standards] 2. Destination-oriented elevators shall not be required to comply with 407.3.4....
-
11B-810.2.2 Dimensions
Access Board's Note to Reader: The Department of Transportation's ADA Standards indicate that compliance is required to the extent construction specifications are within a public entity's...
-
11B-806.3 Guest rooms with communication features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility. ◼...
-
11B-705.1.1.2 Dome spacing
[2010 ADA Standards] 705.1.2 Dome Spacing....
-
SECTION 3101B SCOPE
Note: Existing law limits application of building standards. Please see Health and Safety Code Sections 18938.5 and 116050....
-
Mannington Mills Boucle Collection Commercial Carpet
Performance that lives up to Mannington's standards. Design that lives up to yours....
-
Section 36.103 Relationship to Other Laws (Section-By-Section Analysis and Response to Comments)
Paragraph (a) provides that, except as otherwise specifically provided by this part, the ADA is not intended to apply lesser standards than are required under title V of the Rehabilitation...
-
Organization of This Rule
Throughout this rule, the original ADA Standards, which are republished as Appendix D to 28 CFR part 36, will be referred to as the ‘‘1991 Standards.''...
-
E102.5 IETF (Section-by-Section Analysis)
This standard describes how to carry real-time text conversation session contents in RTP packets....
-
Kitchens and Kitchenettes
Section 804 of the 2010 Standards provides technical requirements for kitchens and kitchenettes....
-
Accessible Fishing Piers and Platforms
Sections 237 and 1005 of the 2010 Standards require at least twenty-five percent (25%) of railings, guards, or handrails (if provided) to be at a 34-inch maximum height (so that a person...
-
5.4.11 Transfer Support Structural Strength Recommendations for M301 and M302
The proposed technical criteria originated from provisions for grab bars in the 2010 Standards....
-
Existing Trails [F247.2]
The term “reconstruction” is not used in the ABA Standards, though the term is used frequently by the trails community....
-
8.3 Alternate Means of Access
Although current technical requirements may prevent compliance with recommended access standards (see Section 7 for examples), Committee members aimed to encourage manufacturers and developers...
-
Overview
Throughout this NPRM, the current, legally enforceable ADA Standards will be referred to as the "1991 Standards," 28 CFR part 36, App....
-
Dept. of Justice Guidance Fact Sheet
facility or part of the facility is readily accessible to and usable by individuals with disabilities, if the construction was commenced after January 26, 1992 (Section 35.151 of the 2010 Standards...
-
A. Measuring Slope and Cross Slope
:slopes tilting side to side) are within the limits allowed by the ADA Standards for Accessible Design ("Standards"). There are three primary ways to determine a given slope: 1....
-
Effective date for barrier removal. (Section-by-Section Analysis)
The Department has provided in § 36.304(d)(2)(ii)(B) that public accommodations are not required to apply the 2010 Standards to barrier removal until 18 months after the publication date...
-
6.1 Universal Receiver: Recommendations
6.1 Universal Receiver: Recommendations The need for a universal receiver was highlighted when it was suggested that standardized transmitting characteristics for both FM and IR ASL be...
-
2.11 Perceived Color of Detectable Warnings
of people with visual impairments to correctly recognize the color of detectable warnings has important implications for both conspicuity and the potential for detectable warning color standardization...
-
11B-404.2.4.1 Swinging doors and gates
From hinge side Pull 60 inches (1524 mm) 36 inches (914 mm) From hinge side Push 44 inches (1118 mm)2 [2010 ADA Standards...
-
EQUIVALENT FACILITATION
[2010 ADA Standards] 103 Equivalent Facilitation....
