Car emergency signaling devices complying with 407.4.9 shall be provided....
Search Results "Pedestrian Signal"
Commonly Searched Documents
-
408.4.8 Emergency Communications
-
409.4.7.1 Type
A telephone and emergency signal device shall be provided in the car....
- Estimote Sticker Beacons - Introducing Nearables
-
R210 Protruding Objects (Section-by-Section Analysis)
R210 Protruding Objects (Section-by-Section Analysis) Objects that protrude into pedestrian circulation paths can be hazardous for pedestrians, especially pedestrians who are blind or...
-
Compatible
Examples are teletypewriters (TTYs), visual signaling devices and amplifiers....
-
Two-Way Communication Systems [§230 and §708]
Communication Systems [§230 and §708] Where two-way communication systems are provided to gain entry to a facility or to restricted spaces, they must include visual and audible signals...
-
11B-408.4.8 Emergency communications
Car emergency signaling devices complying with Section 11B-407.4.9 shall be provided....
-
11B-408.4.8 Emergency communications
Car emergency signaling devices complying with Section 11B-407.4.9 shall be provided....
-
11B-408.4.8 Emergency communications
Car emergency signaling devices complying with Section 11B-407.4.9 shall be provided....
-
3.Guidelines for Compatibility With Peripheral Devices
Products providing auditory output should provide the auditory signal at a standard signal level through an industry standard connector....
-
Site Arrival Points: ADA Standard Section 206.2.1
Section 206.2.1 covers the scoping requirements for site arrival points of accessible routes in the most current ADA Standards.
-
409.4.7.2 Operable Parts
The telephone and emergency signaling device shall comply with 309.3 and 309.4....
-
408.4.8 Emergency Communications
Car emergency signaling devices complying with 407.4.9 shall be provided....
-
11B-409.4.7.2 Operable parts
The telephone and emergency signaling device shall comply with Sections 11B-309.3 and 11B-309.4....
-
A4.28.4 Auxiliary Alarms
To be effective, such devices must be located and oriented so that they will spread signals and reflections throughout a space or raise the overall light level sharply....
-
R306.3.1 Separation
Carefully delineated pedestrian street crossing approaches with plantings or other defined edges provide effective non-visual cues for identifying pedestrian street crossings at roundabouts...
-
Grade (R302.5) (Section-by-Section Analysis)
Grade (R302.5) (Section-by-Section Analysis) Grade is the slope parallel to the direction of pedestrian travel....
-
SIDEWALK
[DSA-AC] A surfaced pedestrian way contiguous to a street used by the public. (As differentiated from the definition of “Walk”.) Advisory Definition of SIDEWALK....
-
Blended Transition
A raised pedestrian street crossing, depressed corner, or similar connection between the pedestrian access route at the level of the sidewalk and the level of the pedestrian street crossing...
-
BLENDED TRANSITION
[DSA-AC] A raised pedestrian street crossing, depressed corner or similar connection between the pedestrian access route at the level of the sidewalk and the level of the pedestrian street...
-
Receivers
Sound quality, internal noise, signal-to-noise ratio, signal strength, and boost vary among products....
-
R302.7.1 Vertical Alignment
Vertical alignment shall be generally planar within pedestrian access routes (including curb ramp runs, blended transitions, turning spaces, and gutter areas within pedestrian access routes...
-
CURB RAMP
[DSA-AC] A sloping prepared surface, intended for pedestrian traffic, which provides access between a walk or sidewalk and a surface located above or below an adjacent curb face....
-
11B-705.1.2.3 Islands or cut-through medians
Detectable warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches...