Search Results "Hybrid Surface System"
-
708 Two-Way Communication Systems
-
11B-502.4 Floor or ground surfaces
Advisory 11B-502.4 Floor or ground surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
Surface
The top layer of ground on a recreation site, ORAR, trail, or beach access route.
-
11B-706 Assistive listening systems
-
Width [4.7.3] and Surface [4.7.4]
Curb ramp surfaces, including flared sides, must comply with requirements in 4.5 for ground and floor surfaces be "stable, firm, and slip resistant."...
-
Signal-to-Noise Ratio: ADA Standard Section 706.5
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
11B-706.5 Signal-to-noise ratio
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
609.5 Surface Hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
Employee Work Areas: ADA Standard Section 203.9
Section 203.9 covers scoping requirements of general exceptions for employee work areas in the most current ADA Standards.
-
902 Dining Surfaces and Work Surfaces
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
Accessible Exterior Surfaces Technical Article
Accessible Exterior Surfaces Technical Article Submitted by: Peter W. Axelson, M.S.M.E., A.T.P. Project Director Denise Chesney, M.E.B.M.E....
-
Inpro Corporation JointMaster® 925 Fire Barrier System Expansion Joint Systems
The 925 Fire Barrier system meets the “Hose System Test” for masonry and concrete walls....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-1008.2.6.2 Use zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....
-
SECTION 907 FIRE ALARM AND DETECTION SYSTEMS
-
230 Two-Way Communication Systems
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with 708....
-
11B-1008.2.4.2 Elevated
The clear width of transfer systems connecting elevated play components shall be permitted to be 24 inches (610 mm) minimum....
-
11B-505.6 Gripping surface
Where handrails are provided along walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length...
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
Legislation
the footrest than the poured concrete surface....
-
11B-505.6 Gripping surface
The bottoms of handrail gripping surfaces shall not be obstructed for more than 20 percent of their length....