Installation of Test Surfaces In accordance with standard EWF design and construction practice (Figure 2), the full depth surfaces were prepared to the same requirements needed for permanent...
Search Results "Hybrid Surface System"
Commonly Searched Documents
-
Installation of Test Surfaces
-
Installation of Aggregate Surfaces at Bradford Woods
Installation of Aggregate Surfaces at Bradford Woods The installation of the aggregate surfaces at Bradford Woods conformed to the following protocol: Prior to installing the crushed...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
- LS-80 Basic Stationary IR System
-
Slip Resistance
Since rating systems are unique to the test method, specific levels of slip resistance can only be meaningfully specified according to a particular measurement protocol....
- Envirobond is Self-Healing
- Organic-Lock: The Self-Healing Organic Binder
-
1014.3 Floor
This section requires the floor surface within camp shelters to be firm and stable and to slope not steeper than 1:48 in any direction....
-
708 Two-Way Communication Systems
[See subsections ...]
-
219 and 706 Assistive Listening Systems
[See subsections ...]
-
708 Two-Way Communication Systems
[See subsections ...]
-
11B-706 ASSISTIVE LISTENING SYSTEMS
[See subsections ...]
-
11B-219 ASSISTIVE LISTENING SYSTEMS
[See subsections ...]
-
11B-706 Assistive listening systems
[See subsections ...]
-
A4.5.1 GENERAL
Wheelchairs can be propelled most easily on surfaces that are hard, stable, and regular....
-
R302.7 Surfaces
R302.7 Surfaces....
-
11B-305.2 Floor or ground surfaces
Floor or ground surfaces of a clear floor or ground space shall comply with Section 11B-302....
- Cargill, Incorporated SafeLane® Surface Overlay CA-48
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
Rollability and Smoothness of Walking Surfaces
surfaces....
-
M301.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
§ 37.3 Automated guideway transit system or AGT
Automated guideway transit system or AGT means a fixed-guideway transit system which operates with automated (driverless) individual vehicles or multi-car trains....