It includes remodeling, renovation, rearrangements in structural parts, and changes or rearrangement of walls and full-height partitions....
Search Results "Transfer Surface Height"
-
III-6.1000 General
-
Knee and Toe Clearance (M303.2.4)
inches deep minimum at 27 inches above the floor Between 9 inches and 27 inches above the floor, knee clearance is permitted to reduce at rate of 1 inch in depth for every 6 inches in height...
-
Dispersion: ADA Standard Section 233.3.5
Section 233.3.5 covers scoping requirements in the current ADA Standards for dispersion of individual residential dwelling units.
-
Industry Standards
Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric) ASTM F 802-83(2003) Standard Guide for Selection of Certain Walkway Surfaces...
-
11B-704.5 TTY shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
704.5 TTY Shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
1131A.2 Changes greater than ½ inch
Changes in level greater than ½ inch (12.7 mm) shall be made by means of a sloped surface not greater than 1 unit vertical in 20 units horizontal (5-percent slope), or a ramp, elevator or...
-
1013.1 General
Tent pads and tent platforms are defined spaces with prepared surfaces for setting up and securing tents....
-
704.5 TTY Shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
4.31.9(2)
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
R409.10 Handrail Extensions
Handrail gripping surfaces shall extend beyond and in the same direction of ramp runs and stair flights in accordance with R409.10....
-
Accessible Classroom Style
This set-up is very helpful when participants need a surface to take notes and refer to materials....
-
1013.1 General
Tent pads and tent platforms are defined spaces with prepared surfaces for setting up and securing tents....
-
Racing Wheelchairs
They are typically used by competitive athletes for training as well as competition and may be used on road or shared use path surfaces (figure 13)....
-
§ 37.53(a)(1)
of all persons similarly situated (collectively, “the EPVA class representatives”); and Metropolitan Transportation Authority, New York City Transit Authority, and Manhattan and Bronx Surface...
-
11B-704.5 TTY shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
218 and 810 Transportation Facilities
Detectable warnings provide a distinctively textured surface of truncated domes....
-
Scoping [4.1.2(1), 4.1.3(1)] and Location [4.3.2]
Clear width, surface texture, running and cross slope, and the treatment of changes in level help determine the usability of walking surfaces by people with mobility impairments....
-
Purpose of the project
For instance, when this project began, tolerances for the measurement of the slope, flatness, and smoothness of exterior walking and rolling surfaces in concrete, asphalt, unit masonry,...
-
Clearance Around Base (M301.4.2 and M302.4.2)
M302.4.2 would require the base of the equipment to provide a clearance 6 inches high minimum measured from the floor and 36 inches deep minimum measured from the edge of the examination surface...
-
Cybex Total Access Lat Pull Exercise Machine
Features Bar Handle Height Adjustment This lever operated single arm handle height adjustment allows the bar to be adjusted for shorter and wheelchair users down to 1400mm start height...
-
TABLE OF CONTENTS
and Work Surfaces 227 Sales and Service 228 Depositories, Vending Machines, Change Machines, Mail Boxes, and Fuel Dispensers 229 Windows 230 Two-Way Communication...
-
DSA IR 11B-4: DETECTABLE WARNINGS (with revisions issued through Nov. 2011)
General: The California Building Code indicates technical criteria for detectable warning surfaces (truncated domes)....
