The architectural standards for accessibility in alterations are contained in the ADA Accessibility Guidelines issued by the Architectural and Transportation Barriers Compliance Board....
Search Results "FTDS: Federal Trail Data Standards"
-
X. Alterations
-
1117B.5.3
California's standards for signage are more stringent than Section 4.30 of the ADA Standards for Accessible Design. 1117B.5.3 Proportions. ...
-
105.2.5 NFPA, F105.2.5 NFPA
Copies of the referenced standards may be obtained from the National Fire Protection Association, 1 Batterymarch Park, Quincy, Massachusetts 02169-7471, (http://www.nfpa.org/). ...
-
502.3.5 Hierarchical Relationships (Section-by-Section Analysis)
This provision corresponds to existing 508 Standards §§ 1194.21(l) and 1194.22(n)....
-
407.3.1 Identification (Section-by-Section Analysis)
This section is new to the 255 Guidelines, but is similar to existing 508 Standards §§ 1194.23(k)(1), 1194.25(c), and 1194.26(b)....
-
203 General Exceptions
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1 Minimum Requirements 203 General Exceptions...
-
3.3.15.2 Side (lateral) reach - unobstructed
The improvement in side reaching performance with increased lower and upper limits as compared to the current standard is likely a function of larger (i.e. higher) WhMDs, and in some cases...
-
[2010 ADAS] 105.2.5 NFPA
Copies of the referenced standards may be obtained from the National Fire Protection Association, 1 Batterymarch Park, Quincy, Massachusetts 02169-7471, (http://www.nfpa.org)....
-
B. 2004 ADA and ABA Accessibility Guidelines
HUD will engage in the rulemaking process in order to replace UFAS with a new accessibility standard based on the updated guidelines for purposes of both Section 504 and ABA compliance....
-
Reasonable Accommodation
While an employer is not required to eliminate an essential function or lower a production standard, it may do so if it wishes....
-
Substantially Limited in Working
and purposes of the Amendments Act, the determination of coverage under the law should not require extensive and elaborate assessment, and the EEOC and the courts are to apply a lower standard...
-
Equipment and furniture. (Section-by-Section Analysis)
The Department suggested that entities apply the accessibility standards for fixed equipment in the 2004 ADAAG to analogous free-standing equipment in order to ensure that such equipment...
-
11B-202.5 Alterations to qualified historic buildings and facilities
. ◼ [2010 ADA Standards] 202.5 Alterations to Qualified Historic Buildings and Facilities....
- Rocky Mountain ADA Center
- ASME
-
Q: What is HCO? Who uses it?
HCO can be accomplished by a call taker using standard stand-alone TTY equipment by alternating speaking into the handset and placing the handset in the TTY when the caller types a response...
-
Measuring Door Openings
To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
Section 36.406(f) Assembly Areas
Assembly Areas In the NPRM, the Department proposed Sec. 36.406(f) to supplement the assembly area requirements of the 2004 ADAAG, which the Department is adopting as part of the 2010 Standards...
-
E2-a
[ADA Standards § 4.4.1] Yes No Note: These objects may be wall mounted or free standing....
-
A5
[ADA Standards § 4.6.6] Yes No If No, is there another area with a curb ramp and on an accessible route that could serve as the drop-off area?...
-
f-iv
[ADA Standards § 4.8.4] Yes No Note: The level landing may be part of the sidewalk or walking surface. Notes: 1. At least 36 inches between handrails 2....
-
504.2.1 Preservation of Accessibility Information in Format Conversion (Section-by-Section Analysis)
This proposed requirement is similar to § 1194.23(j) in the existing 508 Standards....
-
Equipment for Persons with Vision Impairments [4.34.5]
Equipment for Persons with Vision Impairments [4.34.5] Access for people with vision impairments was specified as a performance standard so that manufacturers could examine and develop...