Wheelchair work per meter values for straight and turning were determined for all test course surfaces except sand, under dry conditions using the Wheelchair Work Measurement Method in accordance...
Search Results "Mixed Use"
-
Wheelchair Work Measurement Method
-
4.7.5 SIDES OF CURB RAMPS
Curb ramps with returned curbs may be used where pedestrians would not normally walk across the ramp (see Fig. 12(b)). Figure 12 Sides of Curb Ramps...
-
F245.1 General
A picnic unit is an outdoor space in a picnic facility used for picnicking that contains outdoor constructed features....
-
Transits and construction lasers
Transits and construction lasers are useful for setting or measuring overall elevation points to determine a total slope....
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
§ 37.87(e)
(e) Amtrak and commuter authorities purchasing or leasing used intercity or commuter rail cars that are not readily accessible to and usable by individuals with disabilities shall retain...
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
§ 38.125(a)(2) Exception
The access systems or devices used at a station to which section 37.42 applies must permit compliance with that section....
-
§ 37.213(d)(1)
(1) On March 26, 2001, each operator shall submit to the Department, a summary report listing the number of new buses and used buses it has purchased or leased for the period of October...
-
§ 38.95(a)(2) Exception
The access systems or devices used at a station to which section 37.42 applies must permit compliance with that section....
-
REASONABLE PORTION
The term is intended to mean that the building or facility provides equitable opportunities, advantages, and ease of use for people with disabilities as is otherwise being made available...
-
12) Bathrooms
12) Bathrooms ADAAG: Every public and common use bathroom must be accessible. Generally only one stall must be accessible (standard five-by-five feet)....
-
REASONABLE PORTION
The term is intended to mean that the building or facility provides equitable opportunities, advantages, and ease of use for people with disabilities as is otherwise being made available...
-
11B-812.5.4 Arrangement
Vehicle spaces and access aisles shall be designed so that persons using them are not required to travel behind vehicle spaces or parking spaces other than the vehicle space in which their...
- Tobii PCEye Go Video 2 - Mounting
- Pressalit Care 3000 Adult Changing Table
- Tobii PCEye Go: Access Your Computer or Tablet Through Gaze Interaction Video
-
Wheelmill System Informational Design Video
Requires the Registered User plan or above. Login!
- Web Accessibility 101: Dragon NaturallySpeaking Demonstration Video
- What You Need To Know About LRV in 90 Seconds
-
410.1 General
Because an accessible route requires an 80 inch (2030 mm) vertical clearance, care should be taken in selecting lifts as they may not be equally suitable for use by people using wheelchairs...
-
MAKING THE BUILT ENVIRONMENT ACCESSIBLE
at a facility’s entrance or within its serving or selling space, aisles too narrow to accommodate mobility devices, counters that are too high, or restrooms that are simply too small to use...
-
New Construction and Alterations
Certain dates in the construction process determine which ADA standards—the 1991 Standards or the 2010 Standards—must be used....
-
Accessible Routes (Exterior and Interior)
., the path for general pedestrian use)....
